da | 184.15 | mm | |
Da | 419.999 | mm | |
Ca | 147.803 | mm | |
A1 | 228.6 | mm | |
A2 | 315.119 | mm | |
S | 4.763 | mm | |
ba | 103.188 | mm | |
H | 495.3 | mm | |
H1 | 250.825 | mm | |
H2 | 101.6 | mm | |
J | min. | 666.75 | mm |
J | max. | 749.3 | mm |
J1 | 139.7 | mm | |
L | 869.95 | mm | |
N1 | 41.275 | mm | |
Threaded holes | |||
R1 | 163.512 | mm | |
R2 | 50.8 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 87.313 | mm |
Housing |
SAF 640
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-0-40
|
|||
Labyrinth ring |
2 x LOR 666
|
|||
|
End plug (suffix Y) |
EPR 21
|
Bearing limiting speed | 1500 | r/min |
P60° | 449 | kN | |
P90° | 271 | kN | |
P120° | 169 | kN | |
P150° | 151 | kN | |
P180° | 185 | kN | |
Pa | 82.7 | kN |
Mass pillow block | 364 | kg |
Cap bolt |
4 x 1 1/2-6 UNC
|
|||
Cap bolt recommended tightening torque | 2643.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.5 | in | |
Initial grease fill | 3515.4 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
120 VA V | 108 | - | - | Seals |
---|---|---|---|---|
1800 VRME R | 1671 | - | - | Seals |
25x40x7 HMS5 RG | 25 | 40 | 7 | Seals |
5066 | 12.7 | 28.55 | 6.35 | Seals |
71988 ACMB | 440 | 600 | 74 | Bearings, units and housings |
900 VL R | 825 | - | - | Seals |
GEZ 304 TXE-2LS | 82.55 | 130.175 | 72.238 | Bearings, units and housings |
HCCE 025 R | 28 | 213 | - | Coupling systems |
QJ 1252 MA | 260 | 480 | 90 | Bearings, units and housings |
SNW 9x1.1/2 | 38.1 | 45 | 39.9796 | Bearings, units and housings |
SSAFS 23044 KA x 7.7/8 | 200.025 | - | - | Bearings, units and housings |
SY 2.1/2 DUTF | 63.5 | - | - | Bearings, units and housings |
Hot number:
18581
29862
308-Z
470521
59180 F
6306-2Z/VA228
63700
7218 BECBJ
90809
D/W ER1038
NA 4834
NJ 2220 ECP
PCZ 2222 M
PSMF 121808 A51
SAF 22517 x 3 T
Previous:SAF 22640 T Bearings, units and housings ---- Next:SAF 22640 x 7.1/4 T Bearings, units and housings
Return to SKF bearing