da | 114.3 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 234.95 | mm | |
ba | 51.594 | mm | |
H | 239.713 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.945 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.862 | mm |
Housing |
SAF 026 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-26
|
|||
Taconite seal | TER 118 | |||
|
End plug (suffix Y) |
EPR 15
|
Max. speed for Taconite seal | 700 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 20.2 | kN |
Mass pillow block | 32.2 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10494 | 27.9908 | 43.0022 | 7.0104 | Seals |
---|---|---|---|---|
15818 | 40.005 | 54.991 | 5.9944 | Seals |
17x32x7 HMS5 V | 17 | 32 | 7 | Seals |
55x90x10 HMS5 V | 55 | 90 | 10 | Seals |
BT2-8014/HA3VA901 | 390 | 615.95 | - | Bearings, units and housings |
NU 1876 ECMP | 380 | 480 | 46 | Bearings, units and housings |
NU 309 ECP | 45 | 100 | 25 | Bearings, units and housings |
RNA 6903 | 22 | 30 | 23 | Bearings, units and housings |
SAF 22332 | 160 | - | - | Bearings, units and housings |
SYNT 100 FTF | 100 | - | - | Bearings, units and housings |
W 61816 | 80 | 100 | 10 | Bearings, units and housings |
YSP 209-111 SB-2F | 42.86 | 85 | 44.2 | Bearings, units and housings |
Hot number:
23022 CCK/W33
32390
38x54x10 HMSA10 V
403553
44980
51205 V/HR11Q1
71916 CE/P4A
KMK 11
KMTA 10
NU 2232 ECML
OKBS 71
SAF 1513 x 2.1/4 T
SAFS 22518 TLC
SNL 3136 ATURT
SSAFS 22544 x 8
Previous:SAF 23026 KA x 4.7/16 Bearings, units and housings ---- Next:SAF 23026 KAT x 4.3/8 Bearings, units and housings
Return to SKF bearing