da | 131.762 | mm | |
Da | 225.001 | mm | |
Ca | 75.616 | mm | |
A1 | 133.35 | mm | |
A2 | 206.375 | mm | |
ba | 56.356 | mm | |
H | 287.337 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
J | min. | 371.475 | mm |
J | max. | 406.4 | mm |
J1 | 82.55 | mm | |
L | 466.725 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 36.513 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 56.356 | mm |
Housing |
SAF 030 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-0-21
|
|||
Labyrinth ring |
2 x LOR 125
|
|||
|
End plug (suffix Y) |
EPR 16
|
Bearing limiting speed | 3200 | r/min |
P60° | 189 | kN | |
P90° | 113 | kN | |
P120° | 73.8 | kN | |
P150° | 68.1 | kN | |
P180° | 84.5 | kN | |
Pa | 25.4 | kN |
Mass pillow block | 67.6 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 382.73 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
25100 | 63.5 | 98.45 | 11.13 | Seals |
---|---|---|---|---|
6214-2Z/VA228 | 70 | 125 | 24 | Bearings, units and housings |
71917 CE/P4AL | 85 | 120 | 18 | Bearings, units and housings |
7314 BECBPH | 70 | 150 | 35 | Bearings, units and housings |
80x110x12 HMS5 V | 80 | 110 | 12 | Seals |
86426 | - | - | 33.02 | Seals |
BC4-8016/HA4 | 1300 | 1655 | - | Bearings, units and housings |
BK 1512 | 15 | 21 | 12 | Bearings, units and housings |
S7014 ACD/P4A | 70 | 110 | 20 | Bearings, units and housings |
SIKAC 8 M | 8 | - | 12 | Bearings, units and housings |
SSAFS 22520 x 3.5/16 TLC | 84.1375 | - | - | Bearings, units and housings |
W 17 | 86.233 | 117.475 | - | Bearings, units and housings |
Hot number:
10169
16048 MA
249/710 CAK30/W33
25x47x7 HMSA10 RG
30322
GEZM 108 ES-2RS
K 81206 TN
MB 6
NJ 2315 ECML
NJ 2326 ECML
RNA 4918
S7018 CD/P4A
SSAFS 22536 T
SYWK 20 YTA
XHCE 040/OK 110
Previous:SAF 23030 KA x 5.1/8 Bearings, units and housings ---- Next:SAF 23030 KAT x 5.1/4 Bearings, units and housings
Return to SKF bearing