da | 150.813 | mm | |
Da | 259.999 | mm | |
Ca | 86.614 | mm | |
A1 | 149.225 | mm | |
A2 | 193.675 | mm | |
ba | 64.294 | mm | |
H | 305.594 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
J | min. | 396.875 | mm |
J | max. | 441.325 | mm |
J1 | 85.725 | mm | |
L | 511.175 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 87.313 | mm | |
R2 | 38.1 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 43.656 | mm |
Housing |
SAF 034 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-0-24
|
|||
Labyrinth ring |
2 x LOR 140
|
|||
|
End plug (suffix Y) |
EPR 18
|
Bearing limiting speed | 2800 | r/min |
P60° | 249 | kN | |
P90° | 149 | kN | |
P120° | 94.3 | kN | |
P150° | 85.9 | kN | |
P180° | 103 | kN | |
Pa | 34 | kN |
Mass pillow block | 63.9 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1726203-2RS1 | 17 | 40 | 12 | Bearings, units and housings |
---|---|---|---|---|
24026-2CS5/VT143 | 130 | 200 | 69 | Bearings, units and housings |
2789/2729 | 39.688 | 76.2 | 23.812 | Bearings, units and housings |
33216 | 80 | 140 | 46 | Bearings, units and housings |
412506 | 1135 | - | - | Seals |
6309 | 45 | 100 | 25 | Bearings, units and housings |
6319 M | 95 | 200 | 45 | Bearings, units and housings |
7012 ACE/HCP4A | 60 | 95 | 18 | Bearings, units and housings |
72x140x12 HMS5 RG | 72 | 140 | 12 | Seals |
99198 | 50.292 | 58.7502 | 17.8816 | Seals |
HA 2330 L | 131.7625 | 180 | 139 | Bearings, units and housings |
W 61909 | 45 | 68 | 12 | Bearings, units and housings |
Hot number:
10 VS V
105051
313555 C/VJ202
32317
414006
6012-2Z
6206-2Z/VA208
AOH 240/950
BC4B 322142/HB1
GX 17 F
NKI 65/25
PCM 121410 E
PCMS 2005001.0 E
SSAFS 22524 T
W 619/5
Previous:SAF 23034 KA x 5.13/16 Bearings, units and housings ---- Next:SAF 23034 KA x 5.7/8 Bearings, units and housings
Return to SKF bearing