da | 241.3 | mm | |
Da | 399.999 | mm | |
Ca | 117.805 | mm | |
A1 | 222.25 | mm | |
A2 | 409.575 | mm | |
ba | 96.838 | mm | |
H | 474.663 | mm | |
H1 | 241.3 | mm | |
H2 | 95.25 | mm | |
J | min. | 628.65 | mm |
J | max. | 708.025 | mm |
J1 | 133.35 | mm | |
L | 831.85 | mm | |
N1 | 41.275 | mm | |
Threaded holes | |||
R1 | 130.175 | mm | |
R2 | 46.831 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 69.85 | mm |
Housing |
SAF 052 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x A8898
|
|||
Taconite seal | TER 553 | |||
|
End plug (suffix Y) |
X-5217-2
|
Max. speed for Taconite seal | 325 | r/min |
P60° | 423 | kN | |
P90° | 254 | kN | |
P120° | 160 | kN | |
P150° | 145 | kN | |
P180° | 173 | kN | |
Pa | 81.4 | kN |
Mass pillow block | 247 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.5 | in | |
Initial grease fill | 2749.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
210x240x15 HMSA10 RG | 210 | 240 | 15 | Seals |
---|---|---|---|---|
405703 | 555 | - | - | Seals |
580 VRME R | 565 | - | - | Seals |
71908 ACB/HCP4AL | 40 | 62 | 12 | Bearings, units and housings |
91313 | - | - | 50 | Seals |
BC2B 326372/HA1 | 1319.5 | 1720 | 300 | Bearings, units and housings |
HE 2332 L | 139.7 | 160 | 147 | Bearings, units and housings |
NJ 336 ECM | 180 | 380 | 75 | Bearings, units and housings |
NNU 4880/HB1W33 | 400 | 500 | 100 | Bearings, units and housings |
SA 25 C | 25 | - | 20 | Bearings, units and housings |
SHT 42 | 42 | - | - | Coupling systems |
SSAFS 23038 KATLC x 7 | 177.8 | - | - | Bearings, units and housings |
Hot number:
145x175x15 HMS5 RG
38740
43345
7215 BEGAY
87807
99153
FY 15/16 TF
FYTB 1.7/16 TF
G 18x26x4
GB 4930
PBM 202840 M1G1
PCZ 1216 M
SAF 22310 T
SAFS 22515 x 2.1/2
SALKAC 10 M
Previous:SAF 23052 KAT x 9.1/2 Bearings, units and housings ---- Next:SAF 23052 KATLC x 9.1/2 Bearings, units and housings
Return to SKF bearing