da | 74.612 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 127 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 187.325 | mm | |
H1 | 95.25 | mm | |
H2 | 38.1 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
FSAFS 517
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-17-14
|
|||
Labyrinth ring |
2 x LOR 53
|
|||
|
End plug (suffix Y) |
EPR 9
|
Bearing limiting speed | 5600 | r/min |
P60° | 61.4 | kN | |
P90° | 36.9 | kN | |
P120° | 23.1 | kN | |
P150° | 20.9 | kN | |
P180° | 25.4 | kN | |
Pa | 9.25 | kN |
Mass pillow block | 24 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
23132 CC/W33 | 160 | 270 | 86 | Bearings, units and housings |
---|---|---|---|---|
313822 | 280 | 390 | - | Bearings, units and housings |
51326 M | 130 | 225 | 75 | Bearings, units and housings |
82570 | 209.55 | 292.1 | 19.05 | Seals |
86903 | - | - | 63.5 | Seals |
MB 16 | 80 | 112 | - | Bearings, units and housings |
NU 1996 MA | 480 | 650 | 78 | Bearings, units and housings |
NU 2222 ECML | 110 | 200 | 53 | Bearings, units and housings |
S7002 ACD/HCP4A | 15 | 32 | 9 | Bearings, units and housings |
SAF 1522 x 3.13/16 T | 96.8375 | - | - | Bearings, units and housings |
SY 35 LF | 35 | - | - | Bearings, units and housings |
SY 50 TF/VA228 | 50 | - | - | Bearings, units and housings |
Hot number:
13937
14938
18x40x7 HMSA10 RG
19310
23252 CCK/W33
280x310x16 HDS2 R
30214
36x47x7 HMS5 RG
50x70x10 HMSA10 V
71920 ACE/P4AL
99339
BT4B 332720/HA4
C 2228 K
QJ 304 N2MA
RNA 4924
Previous:SAFS 22517 x 3 TLC Bearings, units and housings ---- Next:SAFS 22517-11 T Bearings, units and housings
Return to SKF bearing