da | 101.6 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 228.6 | mm | |
ba | 46.831 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing | SAFS 024 KA | |||
Bearing | ||||
Adapter sleeve assembly | SNW 3024x4 | |||
Stabilizing ring |
2 x 38151-24
|
|||
Taconite seal | TER 657 | |||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for Taconite seal | 725 | r/min |
P60° | 119 | kN | |
P90° | 71.2 | kN | |
P120° | 44.5 | kN | |
P150° | 40 | kN | |
P180° | 48.9 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 39 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14035 | 35.9156 | 57.15 | 6.35 | Seals |
---|---|---|---|---|
14137 A/14276 | 34.925 | 69.012 | 19.845 | Bearings, units and housings |
1850552 | 469.9 | 520.7 | 20.65 | Seals |
2219 M | 95 | 170 | 43 | Bearings, units and housings |
32007 X/DF | 35 | 62 | - | Bearings, units and housings |
520 VE R | 507 | - | - | Seals |
7010 CE/P4AL | 50 | 80 | 16 | Bearings, units and housings |
71815 ACD/HCP4 | 75 | 95 | 10 | Bearings, units and housings |
BGSB 358371 | 508 | 762 | 139.7 | Bearings, units and housings |
NU 1016 ECM | 80 | 125 | 22 | Bearings, units and housings |
SAFS 23038 KA x 7 | 177.8 | - | - | Bearings, units and housings |
Z 008 | 40 | - | 6 | Seals |
Hot number:
13741
180x200x15 HMS5 RG
313499 B
319440 DA-2LS
6304-RSH
71800 CD/P4
AN 32
BT4B 331089 A/HA4
D/W R0 R
NU 2319 ECML
NU 324 ECJ
NUTR 50110 A
RN-2x11.8 BF/G2
SAFS 23026 KA x 4.7/16
W 619/8 R-2RS1
Previous:SAFS 23024 KAT x 4.3/16 Bearings, units and housings ---- Next:SAFS 23024 KAT-11 x 4.1/4 Bearings, units and housings
Return to SKF bearing