da | 114.3 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
ba | 51.594 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 24.209 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.922 | mm |
Housing |
SAFS 026 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-26
|
|||
Labyrinth ring |
2 x LOR 118
|
|||
|
End plug (suffix Y) |
EPR 15
|
Bearing limiting speed | 3600 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 20.2 | kN |
Mass pillow block | 50.8 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14641 | 37.3126 | 60.3 | 9.53 | Seals |
---|---|---|---|---|
17122 | 43.9928 | 54.991 | 5.9944 | Seals |
45x65x8 CRW1 R | 45 | 65 | 8 | Seals |
61826-2RZ | 130 | 165 | 18 | Bearings, units and housings |
7001 ACE/P4AH | 12 | 28 | 8 | Bearings, units and housings |
86907 | - | - | 38.1 | Seals |
AXK 120155 | 120 | 155 | 4 | Bearings, units and housings |
BD-C 3180 KM-AOH 3180 G | 380 | 650 | 200 | Bearings, units and housings |
FBSA 209/QFC | 45 | - | 165 | Bearings, units and housings |
GEP 530 FS | 530 | 750 | 355 | Bearings, units and housings |
SAFS 22544 x 7.1/2 | 190.5 | - | - | Bearings, units and housings |
SHR 60 | 60 | - | - | Coupling systems |
Hot number:
13810
14808
3200 A-2ZTN9/MT33
6004-2Z/VA201
7034 ACD/P4AH1
71915 CB/P4A
81138 M
85x130x12 HMS5 V
TQO design
C 3096 M
FSYE 3 N
IR 25X30X16 IS1
NNU 41/1400 K30M/W33
S7020 ACE/HCP4A
YET 207-105
Previous:SAFS 22340 TLC Bearings, units and housings ---- Next:SAFS 23026 KA x 4.3/8 Bearings, units and housings
Return to SKF bearing