da | 184.15 | mm | |
Da | 309.999 | mm | |
Ca | 95.809 | mm | |
A1 | 171.45 | mm | |
A2 | 247.65 | mm | |
ba | 74.612 | mm | |
H | 358.775 | mm | |
H1 | 179.4 | mm | |
H2 | 69.85 | mm | |
J | min. | 492.125 | mm |
J | max. | 549.275 | mm |
J1 | 107.95 | mm | |
L | 628.65 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 115.888 | mm | |
R2 | 37.306 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 49.212 | mm |
Housing |
SAFS 040 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-40
|
|||
Labyrinth ring |
2 x LOR 160
|
|||
PosiTrac Plus contact element |
2 x B10724-159
|
|||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for PosiTrac Plus seal | 800 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 85.9 | kN | |
P150° | 77 | kN | |
P180° | 92.5 | kN | |
Pa | 48.9 | kN |
Mass pillow block | 156 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 878.85 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
140x160x12 CRW1 R | 140 | 160 | 12 | Seals |
---|---|---|---|---|
1314 | 70 | 150 | 35 | Bearings, units and housings |
239/950 CAK/W33 | 950 | 1250 | 224 | Bearings, units and housings |
23984 CCK/W33 | 420 | 560 | 106 | Bearings, units and housings |
24936 | 63.5 | 82.62 | 11.13 | Seals |
32040 X | 200 | 310 | 70 | Bearings, units and housings |
511/670 F | 670 | 800 | 105 | Bearings, units and housings |
609/1320 MB | 1320 | 1720 | 128 | Bearings, units and housings |
HE 2330 | 133.35 | 195 | 139 | Bearings, units and housings |
N 214 ECP | 70 | 125 | 24 | Bearings, units and housings |
NKI 80/25 | 80 | 110 | 25 | Bearings, units and housings |
SYR 3 11/16-18 | 93.6625 | - | - | Bearings, units and housings |
Hot number:
11067
1125230
239/670 CAK/W33
330608 C
528210
7320 BEM
D/W R155 R-2ZS
GEZM 500 ES
NJ 2214 ECP
NU 319 ECML
PBM 071212 M1
S71918 CB/HCP4A
SIQG 200 ES
SSAFS 22540 x 7.1/4
SY 1.15/16 LDW
Previous:SAFS 23040 KAT x 7.3/16 Bearings, units and housings ---- Next:SAFS 23040 KATLC x 7.1/8 Bearings, units and housings
Return to SKF bearing