da | 198.438 | mm | |
Da | 339.999 | mm | |
Ca | 101.803 | mm | |
A1 | 190.5 | mm | |
A2 | 276.225 | mm | |
ba | 80.169 | mm | |
H | 400.05 | mm | |
H1 | 200.025 | mm | |
H2 | 79.375 | mm | |
J | min. | 549.275 | mm |
J | max. | 619.125 | mm |
J1 | 114.3 | mm | |
L | 711.2 | mm | |
N1 | 34.925 | mm | |
Threaded holes | |||
R1 | 120.65 | mm | |
R2 | 42.069 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 57.15 | mm |
Housing |
SAFS 044 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 36053-140
|
|||
Labyrinth ring |
2 x LOR 165
|
|||
|
End plug (suffix Y) |
EPR 23
|
Bearing limiting speed | 2000 | r/min |
P60° | 290 | kN | |
P90° | 173 | kN | |
P120° | 107 | kN | |
P150° | 94.3 | kN | |
P180° | 113 | kN | |
Pa | 59.6 | kN |
Mass pillow block | 208 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.25 | in | |
Initial grease fill | 1672.65 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
145x170x13 CRSA1 R | 145 | 170 | 13 | Seals |
---|---|---|---|---|
230x260x15 HMSA10 V | 230 | 260 | 15 | Seals |
528525 | 1447.8 | - | - | Seals |
71915 ACB/HCP4A | 75 | 105 | 16 | Bearings, units and housings |
99851 | 82.55 | 91.059 | 25.4 | Seals |
84641 | - | - | 57.15 | Seals |
BTW 80 CTN9/SP | 80 | 125 | 54 | Bearings, units and housings |
BT4B 334008 G/HA1VA901 | 304.648 | 438.048 | - | Bearings, units and housings |
HA 2324 | 106.3625 | 155 | 112 | Bearings, units and housings |
HJ 234 EC | 170 | 220 | 20 | Bearings, units and housings |
IR 8x12x12.5 | 8 | 12 | 12.5 | Bearings, units and housings |
YAT 209 | 45 | 85 | 37 | Bearings, units and housings |
Hot number:
16094
BD-240/1000 CAK30F/W33-AOH 240/1000
40036
7411 BGAM
930 VRME R
H 3126
IR 8x12x10.5
LS 3047
NKIS 45
OKBS 68
PCM 404450 E
PCZ 0912 M
PWM 404860
W 61809-2RZ
W 619/2
Previous:SAFS 23040 KATLC x 7.3/16 Bearings, units and housings ---- Next:SAFS 23044 KA x 7.15/16 Bearings, units and housings
Return to SKF bearing