da | 215.9 | mm | |
Da | 359.999 | mm | |
Ca | 107.798 | mm | |
A1 | 203.2 | mm | |
A2 | 390.525 | mm | |
ba | 89.694 | mm | |
H | 419.1 | mm | |
H1 | 209.55 | mm | |
H2 | 85.725 | mm | |
J | min. | 571.5 | mm |
J | max. | 635 | mm |
J1 | 127 | mm | |
L | 749.3 | mm | |
N1 | 34.925 | mm | |
Threaded holes | |||
R1 | 122.237 | mm | |
R2 | 42.862 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 56.356 | mm |
Housing |
SAFS 048 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x A8897
|
|||
Taconite seal | TER 551 | |||
|
End plug (suffix Y) |
X-5217-4
|
Max. speed for Taconite seal | 340 | r/min |
P60° | 364 | kN | |
P90° | 218 | kN | |
P120° | 136 | kN | |
P150° | 120 | kN | |
P180° | 145 | kN | |
Pa | 66.7 | kN |
Mass pillow block | 245 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.25 | in | |
Initial grease fill | 2154.6 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
18264 | 46.0502 | 76.2 | 9.53 | Seals |
---|---|---|---|---|
55x72x8 HMSA10 RG | 55 | 72 | 8 | Seals |
625/HR11TN | 5 | 16 | 5 | Bearings, units and housings |
7203 BEGAP | 17 | 40 | 12 | Bearings, units and housings |
85907 | - | - | 31.75 | Seals |
C 4010 V | 50 | 80 | 30 | Bearings, units and housings |
FY 2. TF | 50.8 | - | - | Bearings, units and housings |
NJ 319 ECN2ML | 95 | 200 | 45 | Bearings, units and housings |
PCM 252850 E | 25 | 28 | 50 | Bearings, units and housings |
SAF 23040 KA x 7.1/8 | 180.975 | - | - | Bearings, units and housings |
SY 60 LF | 60 | - | - | Bearings, units and housings |
TUWK 505 L | - | - | - | Bearings, units and housings |
Hot number:
16x30x7 HMSA10 V
22318 EJA/VA405
BD-230/630 CAK/W33-AOH 30/630
23030
618/950 MA
7013 CB/P4A
7406 BCBM
D/W R8 R
FYTB 1.1/2 LDW
GE 70 ES-2LS
NAO 15x28x13
NUB 222 ECJ
PCM 121425 E
SYWK 30 YTA
W 6204
Previous:SAFS 23048 KA x 9 Bearings, units and housings ---- Next:SAFS 23048 KAT x 8.15/16 Bearings, units and housings
Return to SKF bearing