da | 101.6 | mm | |
Da | 215.001 | mm | |
Ca | 85.801 | mm | |
A1 | 120.65 | mm | |
A2 | 187.325 | mm | |
S | 4.763 | mm | |
ba | 61.913 | mm | |
H | 257.175 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 77.787 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.831 | mm |
Housing |
SAW 524
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-24-20
|
|||
Labyrinth ring |
2 x LOR 657
|
|||
|
End plug (suffix Y) |
EPR 14
|
Bearing limiting speed | 2800 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 27.4 | kN |
Mass pillow block | 49.9 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16337 | 41.275 | 68.22 | 7.95 | Seals |
---|---|---|---|---|
20x40x7 CRW1 V | 20 | 40 | 7 | Seals |
33115 | 75 | 125 | 37 | Bearings, units and housings |
51296 F | 480 | 650 | 135 | Bearings, units and housings |
6003-RSH | 17 | 35 | 10 | Bearings, units and housings |
6008/HR11QN | 40 | 68 | 15 | Bearings, units and housings |
7517 | 19.05 | 34.93 | 6.35 | Seals |
85009 | 215.9 | 254 | 16 | Seals |
9663 | 24.6126 | 42.82 | 7.95 | Seals |
IR 75x85x54 | 75 | 85 | 54 | Bearings, units and housings |
NNCF 4936 CV | 180 | 250 | 69 | Bearings, units and housings |
SAF 22340 T | 200 | - | - | Bearings, units and housings |
Hot number:
12905
145x175x15 HMSA10 RG
32205
401106
6413
6595
71919 CE/P4A
7308 BE-2RZP
BT4B 328817 G/HA1VA902
K 16x22x12
LM 29749/711
PRM 758060
S7019 ACD/P4A
SAFS 22218-11 T
W 617/7
Previous:SAW 23524 TLC Bearings, units and housings ---- Next:SAW 23524 x 4 T Bearings, units and housings
Return to SKF bearing