da | 149.225 | mm | |
Da | 309.999 | mm | |
Ca | 119.812 | mm | |
A1 | 171.45 | mm | |
A2 | 307.975 | mm | |
S | 4.763 | mm | |
ba | 86.519 | mm | |
H | 360.363 | mm | |
H1 | 179.375 | mm | |
H2 | 69.85 | mm | |
J | min. | 492.125 | mm |
J | max. | 549.275 | mm |
J1 | 107.95 | mm | |
L | 628.65 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 115.888 | mm | |
R2 | 37.306 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 54.769 | mm |
Housing |
SAW 534
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-34-0
|
|||
Taconite seal | TER 139 | |||
|
End plug (suffix Y) |
EPR 18
|
Max. speed for Taconite seal | 520 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 85.9 | kN | |
P150° | 77 | kN | |
P180° | 92.5 | kN | |
Pa | 56 | kN |
Mass pillow block | 132 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 878.85 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17315 | 44.45 | 62 | 7.95 | Seals |
---|---|---|---|---|
20x35x8 HMS5 RG | 20 | 35 | 8 | Seals |
23184 CKJ/W33 | 420 | 700 | 224 | Bearings, units and housings |
32448 | 82.55 | 114.3 | 11.13 | Seals |
400450 | 40 | - | - | Seals |
470891 | 853 | - | - | Seals |
70x110x10 CRW1 R | 70 | 110 | 10 | Seals |
86430 | - | - | 38.1 | Seals |
90788 | - | - | 45 | Seals |
NNF 5017 ADA-2LSV | 85 | 130 | 60 | Bearings, units and housings |
SY 15/16 TF | 23.812 | - | - | Bearings, units and housings |
WS 89318 | 90 | 13.5 | Bearings, units and housings |
Hot number:
19273
2225561
25x50x8 CRW1 R
320/28 X
470x530x25 HDS2 R
61812-2RS1
6220/C3VL0241
71948 CD/HCP4A
BS2-2205-2RS/VT143
BT4B 332716/HA1
ECW 207
NU 2212 ECPH
RNU 2203 ECP
SAF 1609 x 1.1/2
YEL 206-2F
Previous:SAW 23534 x 5.7/8 Bearings, units and housings ---- Next:SAW 23534 x 5.7/8 TLC Bearings, units and housings
Return to SKF bearing