Bearings, units and housings -- Bearing housings -- Split plummer block housings, SNL and SE 2, 3, 5 and 6 series -- SNL and SE series for bearings on a cylindrical seat, with standard seals -- SKF SE 207
SE 207
Appropriate products
| Bearing (basic designation) |
C 2207
|
|||
| Lock nut | ||||
| Locating ring |
2 x FRB 5.5/72
|
|||
Dimensions
| da | 35 | mm | |
| db | 45 | mm | |
| Ca | 34 | mm | |
| Da | 72 | mm | |
| Db | 56.5 | mm | |
| A | 82 | mm | |
| A1 | 52 | mm | |
| H | 94 | mm | |
| H1 | 50 | mm | |
| H2 | 22 | mm | |
| J | 150 | mm | |
| L | 185 | mm | |
| N | 20 | mm | |
| N1 | 15 | mm | |
| Dowel pins | |||
| J6 | 172 | mm | |
| J7 | 19 | mm | |
| N4 | max. | 5 | mm |
| Seal dimensions | |||
| A2L | 96 | mm | |
Appropriate seals and end cover
 TSN 207 A
|  2 x TSN 207 S
|  ASNH 509
|
Breaking loads, housing
| P0° | 140 | kN | |
| P55° | 190 | kN | |
| P90° | 115 | kN | |
| P120° | 85 | kN | |
| P150° | 80 | kN | |
| P180° | 95 | kN | |
| Pa | 60 | kN |
Yield point, cap bolts
| Q120° | 150 | kN | |
| Q150° | 85 | kN | |
| Q180° | 75 | kN |
Mass
| Mass housing | 2.44 | kg |
Mounting information
| Cap bolt, size | M 10x50 | |||
| Cap bolt, rec. tightening torque | 50 | N·m | ||
| Appropriate attachment bolt, size | G | 12 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 80 | N·m | ||
| Initial grease fill, 20% | 30 | g | ||
| Initial grease fill, 40% | 50 | g | ||