da | 240 | mm | |
Ca | 124 | mm | |
Da | 400 | mm | |
A | 290 | mm | |
A1 | 220 | mm | |
H | 475 | mm | |
H1 | 240 | mm | |
H2 | 80 | mm | |
J | 680 | mm | |
L | 820 | mm | |
N | 70 | mm | |
N1 | 48 | mm | |
Shaft end | |||
ba | 101 | mm | |
bc | 120 | mm | |
Dowel pins | |||
J6 | 760 | mm | |
J7 | 80 | mm | |
N4 | max. | 16 | mm |
Seal stand-out | |||
A2L | 11 | mm | |
A2T | 42 | mm |
2 x TSN 3052 S
| 2 x TNF 3052
| ETS 3052
|
P55° | 2120 | kN | |
P90° | 1270 | kN | |
P120° | 950 | kN | |
P150° | 850 | kN | |
P180° | 1060 | kN | |
Pa | 370 | kN |
Q120° | 2100 | kN | |
Q150° | 1200 | kN | |
Q180° | 1050 | kN |
Mass housing | 162 | kg |
Cap bolt, size | M 36 x 200 | |||
Cap bolt, rec. tightening torque | 600 | N·m | ||
Appropriate attachment bolt, size | G | 42 | mm | |
Appropriate attachment bolt, rec. tightening torque | 3640 | N·m | ||
Eye bolt, size | M12 | |||
Initial grease fill, 20% | 2100 | g | ||
Initial grease fill, 40% | 3800 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
13796 | 34.925 | 61.9 | 6.35 | Seals |
---|---|---|---|---|
14713 | 37.9984 | 50.0126 | 8.001 | Seals |
BD-23956 CCK/W33-OH 3956 H | 260 | 380 | 75 | Bearings, units and housings |
23980 CC/W33 | 400 | 540 | 106 | Bearings, units and housings |
6011-2RS1 | 55 | 90 | 18 | Bearings, units and housings |
85015 | 215.9 | 266.7 | 15.88 | Seals |
FBSA 210/DF | 50 | - | 165 | Bearings, units and housings |
NK 29/30 | 29 | 38 | 30 | Bearings, units and housings |
PCM 140145120 E | 140 | 145 | 120 | Bearings, units and housings |
S7022 CD/HCP4A | 110 | 170 | 28 | Bearings, units and housings |
SAF 22632 x 5.1/2 TLC | 139.7 | - | - | Bearings, units and housings |
SAW 23524 x 4.1/4 TLC | 107.95 | - | - | Bearings, units and housings |
Hot number:
25x38x7 HMSA10 RG
32x52x8 CRW1 V
400351
6312-2Z/VA208
7004 CD/P4AH
71917 CB/HCP4AL
72212/72487
90x115x12 HMSA10 V
BTW 50 CTN9/SP
FYAWK 1.3/8 LTHR
NUH 2320 ECMH
SAF 22232 T
SNP 30/500x18.1/2
SNP 3176x14
SYR 3 15/16-3
Previous:SNLN 3048 Bearings, units and housings ---- Next:SNP 3052x9.1/2 Bearings, units and housings
Return to SKF bearing