Bearings, units and housings -- Bearing housings -- Split plummer block housings, SONL series -- Split plummer block housings, SONL series for bearings on a cylindrical seat -- SKF SONL 236-536
SONL 236-536
Appropriate products
| Bearing (basic designation) | ||||
| Lock nut | ||||
| Lock washer | ||||
| Locating ring |
2 x FRB 14/320
|
|||
Dimensions
| da | 180 | mm | |
| Ca | 114 | mm | |
| Da | 320 | mm | |
| A | 320 | mm | |
| A1 | 240 | mm | |
| A2 | 220 | mm | |
| AA | 340 | mm | |
| AB | 360 | mm | |
| d1 | 205 | mm | |
| B1 | 137 | mm | |
| s2 | 53.5 | mm | |
| H | 455 | mm | |
| H0 | 545 | mm | |
| H1 | 245 | mm | |
| H2 | 75 | mm | |
| J | 545 | mm | |
| J1 | 150 | mm | |
| L | 650 | mm | |
| N | 42 | mm | |
| N1 | 35 | mm | |
| S | 180 | mm | |
| Shaft | |||
| ba | 78 | mm | |
| bb | 258 | mm | |
| bc | 218 | mm | |
| db | 177 | mm | |
| dc | min. | 196 | mm |
| Ga | M 180x3 | ||
| Gb | 39 | mm | |
| r | 4 | mm | |
| Dowel pins | |||
| J6 | 570 | mm | |
| N4 | max. | 20 | mm |
| Circulating oil lubrication system | |||
| PG | G 3/4 | ||
| P1 | 85 | mm | |
| P2 | 93 | mm | |
| RG | G 1.1/2 | ||
| R1 | 278 | mm | |
| R2 | 41 | mm | |
| O1 | 136 | mm | |
| O2 | 220 | mm | |
Appropriate seals and end cover
| Seal kit for a through shaft |
TSO 236
|
|||
| Seal kit for a shaft end |
TSO 236 A
|
|||
| End cover |
ECO 236-536
|
|||
Breaking loads, housing
| P55° | 3750 | kN | |
| P90° | 1530 | kN | |
| P120° | 1040 | kN | |
| P150° | 960 | kN | |
| P180° | 1250 | kN | |
| Pa | 500 | kN |
Yield point, cap bolts
| Q120° | 1800 | kN | |
| Q150° | 1040 | kN | |
| Q180° | 900 | kN |
Mass
| Mass housing | 208 | kg |
Mounting information
| Cap bolt, size | M 24x160 | |||
| Cap bolt, rec. tightening torque | 350 | N·m | ||
| Appropriate attachment bolt, size | G | 30 | mm | |
| Appropriate attachment bolt, rec. tightening torque | 1310 | N·m | ||
| Eye bolt, size |
M 24
|
|||
| Oil level, min. | 83 | mm | ||
| Oil fill, min. | 2.9 | l | ||
| Oil level, max. | 115 | mm | ||
| Oil fill, max. | 4.2 | l | ||