da | 220 | mm | |
db | 242.887 | mm | |
dc | 211.137 | mm | |
Da | 399.999 | mm | |
Ca | 117.805 | mm | |
A1 | 222.25 | mm | |
A2 | 311.15 | mm | |
S | 4.763 | mm | |
ba | 90.487 | mm | |
H | 473.075 | mm | |
H1 | 241.3 | mm | |
H2 | 95.25 | mm | |
L | 831.85 | mm | |
Threaded holes | |||
R1 | 130.175 | mm | |
R2 | 46.831 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 79.375 | mm |
Housing |
SSAFS 244
|
|||
Bearing | ||||
|
||||
Lock nut | ||||
Lock washer | ||||
Stabilizing ring |
SR-44-38
|
|||
Labyrinth ring (db shaft position) |
LOR 179
|
|||
Labyrinth ring (dc shaft position) |
LOR 170
|
End plug (suffix Y) |
EPR 24
|
Bearing limiting speed | 2000 | r/min |
P60° | 423 | kN | |
P90° | 254 | kN | |
P120° | 160 | kN | |
P150° | 145 | kN | |
P180° | 173 | kN | |
Pa | 113 | kN |
Mass pillow block | 352 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 2749.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
28778 | 73.025 | 101.68 | 9.53 | Seals |
---|---|---|---|---|
35x60x10 HMS5 V | 35 | 60 | 10 | Seals |
45x68x7 HMS5 V | 45 | 68 | 7 | Seals |
54971 | 139.7 | 171.45 | 12.7 | Seals |
591/900 M | 900 | 1060 | 95 | Bearings, units and housings |
608-2RSL | 8 | 22 | 7 | Bearings, units and housings |
FSAF 22216 | 80 | - | - | Bearings, units and housings |
FYTB 1.3/16 FM | 30.163 | - | - | Bearings, units and housings |
GS 81130 | 150 | 190 | 9.5 | Bearings, units and housings |
MB 21 | 105 | 145 | - | Bearings, units and housings |
OKCX 400 | 400 | - | ||
SYNT 75 LTS | 75 | - | - | Bearings, units and housings |
Hot number:
13944
17x34x7.9 CRSA1 P
2306 M
30314T84/DB
7011 CB/P4AL
7014 CD/P4AH1
71944 ACD/HCP4A
FYR 2 7/16
MVR1-55
PSMF 202615 A51
S71900 ACD/P4A
SAF 22638 T
SAF 23056 KATLC x 10
SIKAC 10 M/VZ019
SSAFS 22544 x 7.13/16
Previous:SSAFS 22240 TLC Bearings, units and housings ---- Next:SSAFS 22244 T Bearings, units and housings
Return to SKF bearing