da | 63.5 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 120.65 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 161.925 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
L | 285.75 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing |
SSAFS 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-15-0
|
|||
Labyrinth ring |
2 x LOR 38
|
|||
|
End plug (suffix Y) |
EPR 7
|
Bearing limiting speed | 6300 | r/min |
P60° | 75.6 | kN | |
P90° | 45.4 | kN | |
P120° | 28 | kN | |
P150° | 25.4 | kN | |
P180° | 30.2 | kN | |
Pa | 6.94 | kN |
Mass pillow block | 14.3 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
138x152x12 CRSA1 R | 138 | 152 | 12 | Seals |
---|---|---|---|---|
150 VA R | 135 | - | - | Seals |
20x45x7 HMSA10 RG | 20 | 45 | 7 | Seals |
27x47x10 HMS5 RG | 27 | 47 | 10 | Seals |
350x390x18 HDS2 D | 350 | 390 | 18 | Seals |
544167 | 25.4 | 38.07 | 6.35 | Seals |
790 VRME R | 759 | - | - | Seals |
86738 | - | - | 63.5 | Seals |
GEH 120 ESX-2LS | 120 | 210 | 70 | Bearings, units and housings |
OKCX 110 | 110 | - | ||
SAF 22624 x 4.1/4 TLC | 107.95 | - | - | Bearings, units and housings |
SAKB 12 F | 12 | - | 16 | Bearings, units and housings |
Hot number:
232/800 CAF/W33
BD-23268 CAK/W33-AOH 3268 G
38x54x10 HMSA10 V
52x65x8 HMSA10 V
6210 N
71934 CD/HCP4A
BD-C 3038 K-AH 3038 G
C 3040 K
NATR 20
NNU 41/710 K30M/W33
PBM 142020 M1G1
S7013 CB/P4A
SAF 22530
SNL 3134 ATURT
SYE 1 3/4 N-118
Previous:SSAFS 22515 TLC Bearings, units and housings ---- Next:SSAFS 22515 x 2.1/2 T Bearings, units and housings
Return to SKF bearing