da | 82.55 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 196.85 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
L | 349.25 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SSAFS 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Labyrinth ring |
2 x LOR 187
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 5300 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 31.3 | kg |
Cap bolt |
4 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
2000648 | 508 | 561.98 | 23.27 | Seals |
---|---|---|---|---|
20x32x6 HMS5 V | 20 | 32 | 6 | Seals |
20x32x6 HMSA10 V | 20 | 32 | 6 | Seals |
23964 CCK/W33 | 320 | 440 | 90 | Bearings, units and housings |
24130-2CS5/VT143 | 150 | 250 | 100 | Bearings, units and housings |
4050776 | 1028.7 | 1092.2 | 22.225 | Seals |
511/560 F | 560 | 670 | 85 | Bearings, units and housings |
C 3120 V | 100 | 165 | 52 | Bearings, units and housings |
H 204 | 17 | 20 | 24 | Bearings, units and housings |
S71907 CE/HCP4A | 35 | 55 | 10 | Bearings, units and housings |
SAL 15 ES | 15 | - | 12 | Bearings, units and housings |
W 627/3-2Z | 3 | 6 | 2.5 | Bearings, units and housings |
Hot number:
110x130x13 HMSA10 RG
1900260
199 VA R
240/1000 CAF/W33
249/1060 CAF/W33
331271
7213 CD/P4A
7322 BECBM
99351
IR 280x305x69
N 560
SAF 22507
SAF 23048 KAT x 8.15/16
SYR 1 15/16
W 61811-2RZ
Previous:SSAFS 22518 x 3.1/16 TLC Bearings, units and housings ---- Next:SSAFS 22518 x 3.1/4 T Bearings, units and housings
Return to SKF bearing