da | 130.175 | mm | |
Da | 269.999 | mm | |
Ca | 82.804 | mm | |
A1 | 158.75 | mm | |
A2 | 279.4 | mm | |
S | 4.763 | mm | |
ba | 65.088 | mm | |
H | 317.5 | mm | |
H1 | 160.35 | mm | |
H2 | 63.5 | mm | |
L | 539.75 | mm | |
Threaded holes | |||
R1 | 95.25 | mm | |
R2 | 39.688 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
Housing |
SSAFS 530
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-30-0
|
|||
Taconite seal | TER 124 | |||
|
End plug (suffix Y) |
EPR 16
|
Max. speed for Taconite seal | 590 | r/min |
P60° | 230 | kN | |
P90° | 138 | kN | |
P120° | 87.2 | kN | |
P150° | 80.1 | kN | |
P180° | 96.1 | kN | |
Pa | 32.7 | kN |
Mass pillow block | 117 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 623.7 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17234 | 44.45 | 57.15 | 7.95 | Seals |
---|---|---|---|---|
17558 | 44.45 | 69.85 | 7.95 | Seals |
24138 CC/W33 | 190 | 320 | 128 | Bearings, units and housings |
24980 | 63.5 | 88.9 | 11.13 | Seals |
3209 ATN9 | 45 | 85 | 30.2 | Bearings, units and housings |
35080 | 88.9 | 126.97 | 11.13 | Seals |
8871 | 22.225 | 52.07 | 9.525 | Seals |
FYRP 2-18 | 50.8 | - | - | Bearings, units and housings |
NAO 20x35x17 | 20 | 35 | 17 | Bearings, units and housings |
SAF 23048 KA x 8.7/16 | 214.3125 | - | - | Bearings, units and housings |
SSAFS 22640 x 7.1/8 T | 180.975 | - | - | Bearings, units and housings |
SYWK 3/4 YTH | 19.05 | - | - | Bearings, units and housings |
Hot number:
120x140x12 HMSA10 RG
1400238
23172 CCK/W33
17919
292/560
4205 ATN9
6219-Z
71915 ACB/P4AL
PCM 808560 E
RNA 4912
S7024 CE/P4A
SAFS 22240
SAFS 22515-11
SILQG 40 ES
YET 209-112
Previous:SSAFS 22530 x 5.1/8 Bearings, units and housings ---- Next:SSAFS 22530 x 5.1/8 TLC Bearings, units and housings
Return to SKF bearing