

| da | 163.512 | mm | |
| Da | 319.999 | mm | |
| Ca | 95.809 | mm | |
| A1 | 180.975 | mm | |
| A2 | 254 | mm | |
| S | 4.763 | mm | |
| ba | 75.406 | mm | |
| H | 377.825 | mm | |
| H1 | 190.5 | mm | |
| H2 | 76.2 | mm | |
| L | 679.45 | mm | |
| Threaded holes | |||
| R1 | 114.3 | mm | |
| R2 | 41.275 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 60.325 | mm | |
| Housing |
SSAFS 536
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-36-30
|
|||
| Labyrinth ring |
2 x LOR 148
|
|||
|
||||
| End plug (suffix Y) |
EPR 19
|
|||
| Bearing limiting speed | 2600 | r/min |

| P60° | 234 | kN | |
| P90° | 140 | kN | |
| P120° | 84.5 | kN | |
| P150° | 75.6 | kN | |
| P180° | 89 | kN | |
| Pa | 46.3 | kN |
| Mass pillow block | 197 | kg |
| Cap bolt |
4 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 1304.1 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1650 VA R | 1495 | - | - | Seals |
|---|---|---|---|---|
| 30070 | 76.2 | 111.15 | 11.13 | Seals |
| 32318 B | 90 | 190 | 67.5 | Bearings, units and housings |
| 51206 V/HR11T1 | 30 | 52 | 16 | Bearings, units and housings |
| 52230 M | 130 | 215 | 89 | Bearings, units and housings |
| 60/670 N1MAS | 670 | 980 | 136 | Bearings, units and housings |
| 6205/HR22Q2 | 25 | 52 | 15 | Bearings, units and housings |
| 87525 | - | - | 32 | Seals |
| BT4-8070 G/HA1VA901 | 347.662 | 469.9 | - | Bearings, units and housings |
| SNW 130x5.1/8 | 130.175 | 195.4022 | 142.5194 | Bearings, units and housings |
| SY 3/4 TF/VA201 | 19.05 | - | - | Bearings, units and housings |
| W 635-2Z | 5 | 19 | 6 | Bearings, units and housings |
Hot number:
32215/DF
51115
470361
61815-2RS1
7001 CD/HCP4A
725 VL V
90830
BC4B 322930/HA4
BD1B 351890 A
FSAF 22613
N 12
OH 31/630 H
SAF 23040 KAT x 7.1/4
SYWR 40 YTHR
W 618/1
Previous:SSAFS 22534 x 6 TLC Bearings, units and housings ---- Next:SSAFS 22536 T Bearings, units and housings
Return to SKF bearing