da | 180.975 | mm | |
Da | 359.999 | mm | |
Ca | 107.798 | mm | |
A1 | 203.2 | mm | |
A2 | 295.275 | mm | |
S | 4.763 | mm | |
ba | 83.344 | mm | |
H | 419.1 | mm | |
H1 | 209.55 | mm | |
H2 | 85.725 | mm | |
L | 749.3 | mm | |
Threaded holes | |||
R1 | 122.237 | mm | |
R2 | 42.862 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 62.706 | mm |
Housing |
SSAFS 540
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-40-34
|
|||
Labyrinth ring |
2 x LOR 158
|
|||
|
End plug (suffix Y) |
EPR 21
|
Bearing limiting speed | 2200 | r/min |
P60° | 364 | kN | |
P90° | 218 | kN | |
P120° | 136 | kN | |
P150° | 120 | kN | |
P180° | 145 | kN | |
Pa | 58.7 | kN |
Mass pillow block | 267 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Initial grease fill | 2154.6 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
120x180x15 HMSA10 RG | 120 | 180 | 15 | Seals |
---|---|---|---|---|
BD-22234-2CS5K/VT143-H 3134 | 150 | 310 | 86 | Bearings, units and housings |
34383 | 87.3252 | 120.8 | 11.13 | Seals |
54312 + U 312 | 50 | 110 | 70.7 | Bearings, units and housings |
408403 | 805 | - | - | Seals |
50185 | 127 | 177.8 | 12.7 | Seals |
7217 BEGAP | 85 | 150 | 28 | Bearings, units and housings |
FYAWK 40 LTA | 40 | - | - | Bearings, units and housings |
GEZ 012 ES | 19.05 | 31.75 | 14.275 | Bearings, units and housings |
KD10-254 | 26 | 194 | - | Coupling systems |
NU 1980 ECMA | 400 | 540 | 65 | Bearings, units and housings |
SAFS 22515 x 2.3/8 TLC | 60.325 | - | - | Bearings, units and housings |
Hot number:
1600 VE R
25x47x10 HMS5 RG
420x464x20 HDS2 R
6304/HR11TN
99787
FYRP 2 7/16-3
FSAF 22520 TLC
GE 120 ES-2LS
JM 515649/610
K 89417 M
NA 2206.2RS
S71911 ACE/HCP4A
SAF 22626 x 4.1/2
SAFS 22216-11
W 6300-2RZ
Previous:SSAFS 22540 x 7.1/4 TLC Bearings, units and housings ---- Next:SSAFS 22540 x 7.1/8 T Bearings, units and housings
Return to SKF bearing