da | 104.775 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 155.575 | mm | |
ba | 46.831 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
L | 387.35 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SSAFS 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Labyrinth ring |
2 x LOR 112
|
|||
PosiTrac Plus contact element |
2 x B10724-113
|
|||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for PosiTrac Plus seal | 1350 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 39.5 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
28270 | 71.4502 | 107.92 | 7.95 | Seals |
---|---|---|---|---|
33.2x47.3x11.8 TP | 33.22 | 47.88 | - | Seals |
47375 | 120.65 | 146.02 | 11.13 | Seals |
62x85x10 HMSA10 RG | 62 | 85 | 10 | Seals |
71911 CE/HCP4AH1 | 55 | 80 | 13 | Bearings, units and housings |
7205 BEGAP | 25 | 52 | 15 | Bearings, units and housings |
8691 | 22.225 | 36.5 | 6.35 | Seals |
HA 3130 | 131.7625 | 195 | 111 | Bearings, units and housings |
K 28x35x16 | 28 | 35 | 16 | Bearings, units and housings |
PBMF 10012080 M1G1 | 100 | 120 | 80 | Bearings, units and housings |
SYFWK 35 LTHR | 35 | - | - | Bearings, units and housings |
WS 89312 | 60 | 10.5 | Bearings, units and housings |
Hot number:
17448
29385
35x50x10 HMS5 V
60 VA V
6318/C3VL0241
7010 CE/P4AL1
9854
FYTB 1.11/16 WDW
GE 180 ES-2LS
N 1013 KTNHA/HC5SP
NJ 309 ECPH
OKBS 97
RN-4x23.8 BF/G2
S71910 ACD/P4A
SHR 60
Previous:SSAFS 23024 KATLC x 4.1/4 Bearings, units and housings ---- Next:SSAFS 23024 KATLC x 4.3/16 Bearings, units and housings
Return to SKF bearing