da | 106.362 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 155.575 | mm | |
ba | 46.831 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
L | 387.35 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.481 | mm |
Housing |
SSAFS 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Labyrinth ring |
2 x LOR 113
|
|||
PosiTrac Plus contact element |
2 x B10724-113
|
|||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for PosiTrac Plus seal | 1350 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 39.5 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12x25x7 HMSA10 RG | 12 | 25 | 7 | Seals |
---|---|---|---|---|
22338 CCK/W33 | 190 | 400 | 132 | Bearings, units and housings |
316624 | 480 | 680 | - | Bearings, units and housings |
6003/HR11QN | 17 | 35 | 10 | Bearings, units and housings |
7030 CD/HCP4A | 150 | 225 | 35 | Bearings, units and housings |
70x90x10 HMSA10 RG | 70 | 90 | 10 | Seals |
71917 ACB/HCP4A | 85 | 120 | 18 | Bearings, units and housings |
99340 | 88.392 | 97.409 | 23.0124 | Seals |
AOH 3068 G | 320 | 340 | 162 | Bearings, units and housings |
S7024 ACD/HCP4A | 120 | 180 | 28 | Bearings, units and housings |
SNL 3148 TURA | 220 | - | - | Bearings, units and housings |
SSAFS 23026 KA x 4.5/16 | 109.5375 | - | - | Bearings, units and housings |
Hot number:
220x260x16 HDS1 R
185x210x13 HMSA10 V
22244-2CS5/VT143
350769
51126
4210 ATN9
6220/C3VL0241
7309 ACCBM
GEH 17 C
H 242649/610
NU 2213 ECML
NU 30/500 ECMA
OKBS 113
S7003 CE/HCP4A
W 627/6-2Z
Previous:SSAFS 23024 KATLC x 4.1/8 Bearings, units and housings ---- Next:SSAFS 23026 KA x 4.1/2 Bearings, units and housings
Return to SKF bearing