da | 109.537 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
ba | 51.594 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 40.922 | mm |
Housing |
SSAFS 026 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-26
|
|||
Labyrinth ring |
2 x LOR 115
|
|||
|
End plug (suffix Y) |
EPR 15
|
Bearing limiting speed | 3600 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 20.2 | kN |
Mass pillow block | 52.2 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
27x45x8 CRW1 V | 27 | 45 | 8 | Seals |
---|---|---|---|---|
330870 BG | 317.5 | 422.275 | - | Bearings, units and housings |
35x45x7 HMSA10 V | 35 | 45 | 7 | Seals |
629-2RSH | 9 | 26 | 8 | Bearings, units and housings |
BD-BS2-2218-2RSK/VT143-H 2318 E/L73 | 80 | 160 | 48 | Bearings, units and housings |
GEZM 308 ESX-2LS | 88.9 | 139.7 | 66.675 | Bearings, units and housings |
KMTA 7 | 20 | - | 35 | Bearings, units and housings |
NU 219 ECML | 95 | 170 | 32 | Bearings, units and housings |
S7028 ACD/P4A | 140 | 210 | 33 | Bearings, units and housings |
SIA 45 TXE-2LS | 45 | - | 32 | Bearings, units and housings |
SSAFS 23034 KATLC x 6 | 152.4 | - | - | Bearings, units and housings |
W 6305-2RS1 | 25 | 62 | 17 | Bearings, units and housings |
Hot number:
32224
6201-Z
C 3060 M
C 4192 K30MB
IR 12x16x22
N 032
NJ 2236 ECM
NUP 2205 ECP
PBM 100120160 M1G1
PCZ 11260 E
SIKB 12 F/VZ019
SYR 4 N-118
W 09
W 609-2RS1
W 626
Previous:SSAFS 23026 KA x 4.3/8 Bearings, units and housings ---- Next:SSAFS 23026 KA x 4.7/16 Bearings, units and housings
Return to SKF bearing