da | 125.412 | mm | |
Da | 210 | mm | |
Ca | 72.619 | mm | |
A1 | 120.65 | mm | |
A2 | 190.5 | mm | |
ba | 53.975 | mm | |
H | 257.175 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.038 | mm |
Housing |
SSAFS 028 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 36053-50
|
|||
Labyrinth ring |
2 x LOR 122
|
|||
PosiTrac Plus contact element |
2 x B10724-122
|
|||
|
End plug (suffix Y) |
EPR 27
|
Max. speed for PosiTrac Plus seal | 1150 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 22.2 | kN |
Mass pillow block | 61.2 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
110x150x12 HMS5 V | 110 | 150 | 12 | Seals |
---|---|---|---|---|
140 VA R | 126 | - | - | Seals |
33010/DF | 50 | 80 | - | Bearings, units and housings |
510 VE R | 497 | - | - | Seals |
550 VRME R | 536 | - | - | Seals |
61952 MA | 260 | 360 | 46 | Bearings, units and housings |
71914 ACE/HCP4AH1 | 70 | 100 | 16 | Bearings, units and housings |
99168 | 42.8752 | 48.4124 | 17.4752 | Seals |
OH 3152 HTL | 240 | 260 | 190 | Bearings, units and housings |
SILKB 10 F | 10 | - | 14 | Bearings, units and housings |
SYR 2 3/16 | 55.5625 | - | - | Bearings, units and housings |
W 6307 | 35 | 80 | 21 | Bearings, units and housings |
Hot number:
1212 ETN9
17x47x10 HMS5 RG
230/600 CAK/W33 + AOHX 30/600
23032-2CS5/VT143
232/500 CAK/W33
24286
42x65x10 HMS5 V
550259
60/1060 MB
85039
GEZ 312 ES
GEZM 208 ESX-2LS
PCM 13013560 M
PPM 161815
SC 20 ES
Previous:SSAFS 23028 KATLC x 4.13/16 Bearings, units and housings ---- Next:SSAFS 23028 KATLC x 4.7/8 Bearings, units and housings
Return to SKF bearing