

| da | 127 | mm | |
| Da | 210 | mm | |
| Ca | 72.619 | mm | |
| A1 | 120.65 | mm | |
| A2 | 255.588 | mm | |
| ba | 53.975 | mm | |
| H | 257.175 | mm | |
| H1 | 133.35 | mm | |
| H2 | 53.975 | mm | |
| L | 419.1 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 30.163 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 46.038 | mm | |
| Housing |
SSAFS 028 KA
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
2 x 36053-50
|
|||
| Taconite seal | TER 123 | |||
|
||||
| End plug (suffix Y) |
EPR 27
|
|||
| Max. speed for Taconite seal | 625 | r/min |

| P60° | 185 | kN | |
| P90° | 111 | kN | |
| P120° | 72.5 | kN | |
| P150° | 66.7 | kN | |
| P180° | 81.4 | kN | |
| Pa | 22.2 | kN |
| Mass pillow block | 61.2 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 379.89 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 14940 | 38.1 | 57.15 | 7.95 | Seals |
|---|---|---|---|---|
| 23048 CC/W33 | 240 | 360 | 92 | Bearings, units and housings |
| 27471 | 69.85 | 98.45 | 11.13 | Seals |
| 54960 | 139.7 | 171.45 | 12.7 | Seals |
| 550154 | 44.45 | 62.05 | 7.95 | Seals |
| BC2B 320119 | 300 | 460 | 180 | Bearings, units and housings |
| FSYE 3 1/2 N | 88.9 | - | - | Bearings, units and housings |
| H 3134 L | 150 | 200 | 122 | Bearings, units and housings |
| PRM 909550 | 90 | 95 | 50 | Bearings, units and housings |
| SAF 22510-210 | 42.8625 | - | - | Bearings, units and housings |
| SAW 23544 x 7.1/2 | 190.5 | - | - | Bearings, units and housings |
| SYFWK 50 LTA | 50 | - | - | Bearings, units and housings |
Hot number:
BD-22317 EK-H 2317
6315-RS1
71824 ACD/HCP4
71922 ACD/HCP4A
891/670 M
99367
BC4B 457969
C 30/600 KM
IR 20x25x26.5
NAO 25x42x32
NCF 2996 V
PWKRE 90.2RS
RLS 6
SNP 3260x10.15/16
YAR 207-107-2FW/VA201
Previous:SSAFS 23028 KAT x 4.7/8 Bearings, units and housings ---- Next:SSAFS 23028 KATLC x 4.13/16 Bearings, units and housings
Return to SKF bearing