da | 123.825 | mm | |
Da | 210 | mm | |
Ca | 72.619 | mm | |
A1 | 120.65 | mm | |
A2 | 190.5 | mm | |
ba | 53.975 | mm | |
H | 257.175 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.038 | mm |
Housing |
SSAFS 028 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 36053-50
|
|||
Labyrinth ring |
2 x LOR 121
|
|||
|
End plug (suffix Y) |
EPR 27
|
Bearing limiting speed | 3400 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 22.2 | kN |
Mass pillow block | 61.2 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
11590/11520 | 15.875 | 42.862 | 14.288 | Bearings, units and housings |
---|---|---|---|---|
17x29x5 HMSA10 V | 17 | 29 | 5 | Seals |
18924 | 47.625 | 88.8 | 11.13 | Seals |
23188 CAK/W33 | 440 | 720 | 226 | Bearings, units and housings |
3727 | 9.525 | 22.23 | 6.35 | Seals |
7064 BGM | 320 | 480 | 74 | Bearings, units and housings |
OKC 800 | 800 | - | ||
PCZ 6476 M | 101.6 | 106.3625 | 120.65 | Bearings, units and housings |
PL 670 | - | - | 53.5686 | Bearings, units and housings |
PSM 708560 A51 | 70 | 85 | 60 | Bearings, units and housings |
SAKAC 20 M | 20 | - | 25 | Bearings, units and housings |
SIL 6 E | 6 | - | 6 | Bearings, units and housings |
Hot number:
1180 VE R
16100
2200580
22240-2CS5K/VT143
239/850 CA/W33
3319 A
61896 MA
61913-2RS1
7206 BECBPH
7411 BCBM
BT1-8003/HA1
LS 7095
MB 4
OKBS 61
PSMF 152212 A51
Previous:SSAFS 23028 KA x 4.15/16 Bearings, units and housings ---- Next:SSAFS 23028 KA x 5 Bearings, units and housings
Return to SKF bearing