da | 152.4 | mm | |
Da | 259.999 | mm | |
Ca | 86.614 | mm | |
A1 | 149.225 | mm | |
A2 | 261.938 | mm | |
ba | 64.294 | mm | |
H | 298.45 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
L | 511.175 | mm | |
Threaded holes | |||
R1 | 87.313 | mm | |
R2 | 38.1 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 44.45 | mm |
Housing |
SSAFS 034 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-0-24
|
|||
Taconite seal | TER 141 | |||
|
End plug (suffix Y) |
EPR 18
|
Max. speed for Taconite seal | 520 | r/min |
P60° | 249 | kN | |
P90° | 149 | kN | |
P120° | 94.3 | kN | |
P150° | 85.9 | kN | |
P180° | 103 | kN | |
Pa | 34 | kN |
Mass pillow block | 92 | kg |
Cap bolt |
4 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
25x40x7 CRW1 V | 25 | 40 | 7 | Seals |
---|---|---|---|---|
313 NR | 65 | 140 | 33 | Bearings, units and housings |
61248 | 155.575 | 190.55 | 14.3 | Seals |
FY 20 WDW | 20 | - | - | Bearings, units and housings |
HM 44 T | 32 | - | 220 | Bearings, units and housings |
HME 31/600 | 85 | - | 600 | Bearings, units and housings |
K 10x16x12 TN | 10 | 16 | 12 | Bearings, units and housings |
NJ 2311 ECPH | 55 | 120 | 43 | Bearings, units and housings |
OKC 045 | 45 | - | ||
SAF 22517 x 2.13/16 | 71.4375 | - | - | Bearings, units and housings |
SAFS 22538 x 7 | 177.8 | - | - | Bearings, units and housings |
SYNT 60 L | 60 | - | - | Bearings, units and housings |
Hot number:
110x150x12 HMSA10 RG
120 VA R
22248 CC/W33
31320 X/DF
32316/DF
471061
6318/HC5C3
FSAF 22518 x 3.1/4 T
NU 210 ECM/C3VL0241
NU 3156 ECMA
SAF 23036 KAT x 6.1/2
SAFS 22532 x 5.1/2
SONL 218-518
W 619/3 R-2Z
YAR 215-2F
Previous:SSAFS 23034 KAT x 5.7/8 Bearings, units and housings ---- Next:SSAFS 23034 KATLC x 5.13/16 Bearings, units and housings
Return to SKF bearing