da | 174.625 | mm | |
Da | 289.999 | mm | |
Ca | 89.789 | mm | |
A1 | 158.75 | mm | |
A2 | 225.425 | mm | |
ba | 69.85 | mm | |
H | 338.137 | mm | |
H1 | 169.875 | mm | |
H2 | 66.675 | mm | |
L | 558.8 | mm | |
Threaded holes | |||
R1 | 104.775 | mm | |
R2 | 33.337 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 47.625 | mm |
Housing |
SSAFS 038 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-38
|
|||
Labyrinth ring |
2 x LOR 154
|
|||
|
End plug (suffix Y) |
EPR 21
|
Bearing limiting speed | 2400 | r/min |
P60° | 226 | kN | |
P90° | 136 | kN | |
P120° | 85.9 | kN | |
P150° | 78.3 | kN | |
P180° | 94.3 | kN | |
Pa | 40 | kN |
Mass pillow block | 132 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 793.8 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12325 | 31.75 | 41.25 | 6.35 | Seals |
---|---|---|---|---|
2207 E-2RS1KTN9 | 35 | 72 | 23 | Bearings, units and housings |
2307 EKTN9 + H 2307 | 30 | 80 | 31 | Bearings, units and housings |
34886 | 88.9 | 114.33 | 9.53 | Seals |
45x68x7 HMS5 V | 45 | 68 | 7 | Seals |
68450/68712 | 114.3 | 180.975 | 34.925 | Bearings, units and housings |
NJ 340 ECML | 200 | 420 | 80 | Bearings, units and housings |
NU 212 ECML | 60 | 110 | 22 | Bearings, units and housings |
NU 2314 ECML | 70 | 150 | 51 | Bearings, units and housings |
PFT 20 FM | 20 | - | - | Bearings, units and housings |
W 20 | 101.2952 | 139.7 | - | Bearings, units and housings |
Z 012 | 60 | - | 6 | Seals |
Hot number:
2305 ETN9
56137
66230
7028 ACD/HCP4A
7213 BECBP
85900
GB 4932
IR 12x15x12
HN 1612
K 55x63x25
PCM 222520 M
PCM 252850 E
PF 25 TF
RNA 2204.2RS
SAF 23044 KATLC x 7.13/16
Previous:SSAFS 23038 KA x 6.15/16 Bearings, units and housings ---- Next:SSAFS 23038 KA x 7 Bearings, units and housings
Return to SKF bearing