Material | Cast iron |
d | 38.1 | mm | |
A | 48 | mm | |
A1 | 30 | mm | |
A5 | 26 | mm | |
B1 | 43.2 | mm | |
H | 99 | mm | |
H1 | 49.2 | mm | |
H2 | 19 | mm | |
J | 135.5 | mm | |
J | max. | 146 | mm |
J | min. | 125 | mm |
L | 175 | mm | |
N | 24.5 | mm | |
N1 | 14 | mm | |
s1 | 32.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 161 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 30.7 | kN | |
Basic static load rating | C0 | 19 | kN | |
Fatigue load limit | Pu | 0.8 | kN | |
Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.85 | kg |
Hexagonal key size for grub screw | N | 4.763 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
11096 | 31.75 | 41.28 | 4.78 | Seals |
---|---|---|---|---|
16008/HR11QN | 40 | 68 | 9 | Bearings, units and housings |
16692 | 42.8752 | 61.9 | 6.35 | Seals |
BD-231/1000 CAKF/W33-OH 31/1000 H | 950 | 1580 | 462 | Bearings, units and housings |
7006 ACE/HCP4A | 30 | 55 | 13 | Bearings, units and housings |
7007 ACD/HCP4A | 35 | 62 | 14 | Bearings, units and housings |
71968 ACMB | 340 | 460 | 56 | Bearings, units and housings |
95x120x12 HMSA10 V | 95 | 120 | 12 | Seals |
NCF 29/530 V | 530 | 710 | 106 | Bearings, units and housings |
NCF 2920 CV | 100 | 140 | 24 | Bearings, units and housings |
NKX 17 Z | 17 | 26 | 25 | Bearings, units and housings |
RMS 9 | 28.575 | 71.438 | 20.638 | Bearings, units and housings |
Hot number:
16006/HR22Q2
20148
21320 EK
405103
6013-2RS1
70/530 AM
7011 CB/P4AL
7232 BGAM
BT4-8086 G/HA1
HE 210
K 81124 TN
NU 18/600 ECMA/HB1
OKBS 76
PSM 405060 A51
S71911 ACE/P4A
Previous:SY 1.1/16 TF Bearings, units and housings ---- Next:SY 1.1/2 LDW Bearings, units and housings
Return to SKF bearing