Material | Cast iron |
d | 42.862 | mm | |
A | 48 | mm | |
A1 | 32 | mm | |
A5 | 23 | mm | |
B1 | 44 | mm | |
H | 107 | mm | |
H1 | 54 | mm | |
H2 | 21 | mm | |
J | 143.5 | mm | |
J | max. | 152 | mm |
J | min. | 135 | mm |
L | 187 | mm | |
N | 22.5 | mm | |
N1 | 14 | mm | |
s1 | 26.5 | mm | |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). |
|||
Dowel pins | |||
J6 | 173 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 33.2 | kN | |
Basic static load rating | C0 | 21.6 | kN | |
Fatigue load limit | Pu | 0.915 | kN | |
Limiting speed | 850 | r/min |
Mass bearing unit | 2.2 | kg |
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 7.4 | N·m | ||
Appropriate SKF mounting kit | 626830 | |||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing |
SY 509 M/VZ033
|
|||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22244-2CS5/VT143 | 220 | 400 | 108 | Bearings, units and housings |
---|---|---|---|---|
BD-23030-2CS5K/VT143-H 3030 E | 135 | 225 | 56 | Bearings, units and housings |
25x45x7 HMSA10 RG | 25 | 45 | 7 | Seals |
409500 | 865 | - | - | Seals |
56425/56650 | 107.95 | 165.1 | 36.512 | Bearings, units and housings |
60x100x10 HMS5 V | 60 | 100 | 10 | Seals |
71812 ACD/HCP4 | 60 | 78 | 10 | Bearings, units and housings |
85 VA V | 76 | - | - | Seals |
99108 | 27.6606 | 35.7124 | 11.1252 | Seals |
JH 415647/610 | 75 | 145 | 51 | Bearings, units and housings |
NU 1020 M/C3VL0241 | 100 | 150 | 24 | Bearings, units and housings |
PFT 1.1/4 TR | 31.75 | - | - | Bearings, units and housings |
Hot number:
24015 CC/W33
26x37x7 HMSA10 RG
29322 E
6204/HC5C3
D/W R0-2Z
FSAF 22518 x 3.1/8 TLC
FYJ 45 KF
HM 30/500
NU 29/950 ECMA
NJ 313 ECP
NU 2264 ECMA
NUP 224 ECML
NUP 2313 ECML
S7014 ACE/HCP4A
SAFS 22217
Previous:SY 1.11/16 FM Bearings, units and housings ---- Next:SY 1.11/16 TDW Bearings, units and housings
Return to SKF bearing