| Material | Cast iron | |||



| d | 44.45 | mm | |
| A | 54 | mm | |
| A1 | 34 | mm | |
| A5 | 33 | mm | |
| B | 51.6 | mm | |
| H | 114 | mm | |
| H1 | 57.2 | mm | |
| H2 | 22 | mm | |
| J | 157 | mm | |
| J | max. | 165 | mm |
| J | min. | 149 | mm |
| L | 203 | mm | |
| N | 26 | mm | |
| N1 | 18 | mm | |
| s1 | 32.6 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 4 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 187 | mm | |
| J7 | 19 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 35.1 | kN | |
| Basic static load rating | C0 | 23.2 | kN | |
| Fatigue load limit | Pu | 0.98 | kN | |
| Limiting speed | 4000 | r/min |
(with shaft tolerance h6)
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 40x68x8 HMS5 V | 40 | 68 | 8 | Seals |
|---|---|---|---|---|
| 43x62x8 HMSA10 RG | 43 | 62 | 8 | Seals |
| 6319-2RS1 | 95 | 200 | 45 | Bearings, units and housings |
| 629-2RSL | 9 | 26 | 8 | Bearings, units and housings |
| 81253 | 206.375 | 257.18 | 25.4 | Seals |
| 87445 | - | - | 25.4 | Seals |
| 99821 | 36.5252 | 45.2374 | 17.4752 | Seals |
| BC2B 326379/HA4 | 800 | 1260 | 375 | Bearings, units and housings |
| FYJ 505 | - | - | - | Bearings, units and housings |
| FYRP 3 1/2 | 88.9 | - | - | Bearings, units and housings |
| SAF 1518 x 3.1/8 T | 79.375 | - | - | Bearings, units and housings |
| YAR 208-2F | 40 | 80 | 49.2 | Bearings, units and housings |
Hot number:
53307 + U 307
538565
617670
708/1250 AMB
7638
92570
KR 26 PPA
N 1008 KPHA/SP
NU 2224 ECM
PWM 354130
S7015 ACB/P4A
SNW 9x1.1/2
SSAFS 22536 x 6.3/8 TLC
W 61806-2RS1
YELAG 209-111
Previous:SY 1.3/16 WDW Bearings, units and housings ---- Next:SY 1.3/4 FM Bearings, units and housings
Return to SKF bearing