| Material | Cast iron | |||



| d | 12.7 | mm | |
| A | 32 | mm | |
| A1 | 18 | mm | |
| B1 | 28.6 | mm | |
| H | 57 | mm | |
| H1 | 30.2 | mm | |
| H2 | 14 | mm | |
| J | 97 | mm | |
| J | max. | 106 | mm |
| J | min. | 88 | mm |
| L | 127 | mm | |
| N | 20.5 | mm | |
| N1 | 11.5 | mm | |
| s1 | 22.1 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 1 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 11.5 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 9.56 | kN | |
| Basic static load rating | C0 | 4.75 | kN | |
| Fatigue load limit | Pu | 0.2 | kN | |
| Limiting speed | 9500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.52 | kg |
| Hexagonal key size for grub screw | N | 3.175 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in |
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 1000232 | 254 | 292.1 | 15.88 | Seals |
|---|---|---|---|---|
| 18444 | 46.8376 | 69.85 | 7.95 | Seals |
| 315869 A | 950 | 1150 | 90 | Bearings, units and housings |
| 30217 | 85 | 150 | 30.5 | Bearings, units and housings |
| 471221 | 1157 | - | - | Seals |
| 51105 V/HR22Q2 | 25 | 42 | 11 | Bearings, units and housings |
| 52x65x8 HMS5 V | 52 | 65 | 8 | Seals |
| 85039 | - | - | 50.8 | Seals |
| PCMF 121415 E | 12 | 14 | 15 | Bearings, units and housings |
| QJ 344 N2/309829 | 220 | 460 | 88 | Bearings, units and housings |
| SAW 23544 T | 201.6125 | - | - | Bearings, units and housings |
| W 61911-2RS1 | 55 | 80 | 13 | Bearings, units and housings |
Hot number:
1318 K
330608 C
3311 DNRCBM
6306-2Z/VA208
7015 CE/HCP4AL1
719/9 CE/HCP4A
EE 168400/168500
FSAF 23024 KA x 4.1/4
HK 4518 RS
KR 22 XB
OKBS 113
PWM 253030
SAF 22626 TLC
SSAFS 22518 x 3.1/16 TLC
STO 35
Previous:SY 1.9/16 TF Bearings, units and housings ---- Next:SY 1/2 TF Bearings, units and housings
Return to SKF bearing