| Material | Cast iron | |||



| d | 17 | mm | |
| A | 32 | mm | |
| A1 | 18 | mm | |
| B | 27.4 | mm | |
| H | 57 | mm | |
| H1 | 30.2 | mm | |
| H2 | 14 | mm | |
| J | 97 | mm | |
| J | max. | 106 | mm |
| J | min. | 88 | mm |
| L | 127 | mm | |
| N | 20.5 | mm | |
| N1 | 11.5 | mm | |
| s1 | 15.9 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 1 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 11.5 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 9.56 | kN | |
| Basic static load rating | C0 | 4.75 | kN | |
| Fatigue load limit | Pu | 0.2 | kN | |
| Limiting speed | 9500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.46 | kg |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in |
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 25x47x10 HMS5 RG | 25 | 47 | 10 | Seals |
|---|---|---|---|---|
| 6410 | 50 | 130 | 31 | Bearings, units and housings |
| 71912 CE/HCP4AH1 | 60 | 85 | 13 | Bearings, units and housings |
| 7214 BECBPH | 70 | 125 | 24 | Bearings, units and housings |
| KMFE 13 | 15 | - | 65 | Bearings, units and housings |
| NJ 2324 ECM | 120 | 260 | 86 | Bearings, units and housings |
| NNCL 4952 CV | 260 | 360 | 100 | Bearings, units and housings |
| SAW 23544 x 7.13/16 T | 198.4375 | - | - | Bearings, units and housings |
| SHR 42 | 42 | - | - | Coupling systems |
| SYR 2 3/4-3 | 69.85 | - | - | Bearings, units and housings |
| W 6205-2RZ | 25 | 52 | 15 | Bearings, units and housings |
| W 627-2RS1 | 7 | 22 | 7 | Bearings, units and housings |
Hot number:
10152
BD-23168-2CS5K/VT143-OH 3168 HE
239/670 CA/W33
3205 ATN9
33701
48x72x8 HMS5 RG
51206 V/HR11Q1
6308/HR11QN
7006 ACE/HCP4AH1
8782
99350
NU 215 ECP
NU 2215 ECPH
SNW 32x5.3/4
XHCE 035/OK 80
Previous:SY 17 FM Bearings, units and housings ---- Next:SY 2. FM Bearings, units and housings
Return to SKF bearing