Material | Cast iron |
d | 74.613 | mm | |
A | 72 | mm | |
A1 | 48 | mm | |
B | 73.3 | mm | |
H | 166 | mm | |
H1 | 82.6 | mm | |
H2 | 33 | mm | |
J | 216 | mm | |
J | max. | 229 | mm |
J | min. | 203 | mm |
L | 279 | mm | |
N | 35 | mm | |
N1 | 22 | mm | |
s1 | 46.3 | mm | |
Threaded hole | |||
RG | 1/8-27 NPT | ||
R1 | 5.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.579 | mm | |
SWN | 11.113 | mm | |
GN | 1/8-27 NPT |
Basic dynamic load rating | C | 66.3 | kN | |
Basic static load rating | C0 | 49 | kN | |
Fatigue load limit | Pu | 2.04 | kN | |
Limiting speed | 2600 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 7.05 | kg |
Hexagonal key size for grub screw | N | 5.556 | mm | |
Recommended tightening torque for grub screw | 28.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 20 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.75 | in |
Housing |
SY 515 U
|
|||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
47x90x10 HMSA10 RG | 47 | 90 | 10 | Seals |
---|---|---|---|---|
72x100x10 HMSA10 V | 72 | 100 | 10 | Seals |
FSAF 1518 x 3.1/16 T | 77.7875 | - | - | Bearings, units and housings |
GS 89314 | 70 | 125 | 12 | Bearings, units and housings |
GX 17 F | 17 | 47 | 16 | Bearings, units and housings |
NKXR 40 | 40 | 52 | 32 | Bearings, units and housings |
S7007 ACB/HCP4A | 35 | 62 | 14 | Bearings, units and housings |
S7024 CD/P4A | 120 | 180 | 28 | Bearings, units and housings |
S7213 CD/HCP4A | 65 | 120 | 23 | Bearings, units and housings |
SNP 30/530x19.1/2 | 495.3 | 630.3772 | 268.7066 | Bearings, units and housings |
W 61909-2Z | 45 | 68 | 12 | Bearings, units and housings |
XHCE 055/OK 140 | 140 | 425 | - | Coupling systems |
Hot number:
21910
2215 EKTN9
22x32x7 CRS1 V
22x36x7 HMS5 RG
39581/39520
81224 TN
99418
99347
H 218
NK 32/20 TN
NU 418
SAFS 22517 x 2.7/8
SNW 16x2.11/16
T4DB 170
W 617/4 XR
Previous:SY 2.15/16 TF/VA228 Bearings, units and housings ---- Next:SY 2.3/16 DUTF Bearings, units and housings
Return to SKF bearing