Material | Cast iron |
d | 50.8 | mm | |
A | 60 | mm | |
A1 | 40 | mm | |
A5 | 37.5 | mm | |
B1 | 48.4 | mm | |
H | 126 | mm | |
H1 | 63.5 | mm | |
H2 | 24 | mm | |
J | 171.5 | mm | |
J | max. | 181 | mm |
J | min. | 162 | mm |
L | 219 | mm | |
N | 27.5 | mm | |
N1 | 18 | mm | |
s1 | 35.9 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 4.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 201 | mm | |
J7 | 21 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 43.6 | kN | |
Basic static load rating | C0 | 29 | kN | |
Fatigue load limit | Pu | 1.25 | kN | |
Limiting speed | 3600 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 3.55 | kg |
Hexagonal key size for grub screw | N | 5.556 | mm | |
Recommended tightening torque for grub screw | 28.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
30x62x10 HMS5 V | 30 | 62 | 10 | Seals |
---|---|---|---|---|
38.5x58x7 HMSA10 RG | 38.5064 | 58 | 7 | Seals |
403002 | 270 | - | - | Seals |
709 ACD/HCP4AH | 9 | 24 | 7 | Bearings, units and housings |
7092 BM | 460 | 680 | 100 | Bearings, units and housings |
719/710 ACMB | 710 | 950 | 106 | Bearings, units and housings |
7226 ACD/HCP4A | 130 | 230 | 40 | Bearings, units and housings |
BT4B 330742 A/HA4 | 863.6 | 1219.1 | - | Bearings, units and housings |
PBM 708560 M1G1 | 70 | 85 | 60 | Bearings, units and housings |
SAF 1322 | 110 | - | - | Bearings, units and housings |
SAF 23032 KATLC x 5.7/16 | 138.1125 | - | - | Bearings, units and housings |
SAF 23034 KATLC x 5.7/8 | 152.4 | - | - | Bearings, units and housings |
Hot number:
16008/HR22T2
19569
BD-22352 CCK/W33-OH 2352 H
52305
608-RSH
GEZ 100 ESL-2LS
GEZM 300 ES-2RS
IR 40x45x17
KMTA 13
NJG 2338 VH
NKXR 20
SAF 22609
SAW 23518 x 3.1/8 TLC
SYJ 1.1/4 TF
XHCE 040/OK 120
Previous:SY 17 TF Bearings, units and housings ---- Next:SY 2. TF Bearings, units and housings
Return to SKF bearing