| Material | Cast iron | |||



| d | 25 | mm | |
| A | 36 | mm | |
| A1 | 22 | mm | |
| A5 | 18 | mm | |
| B1 | 44.4 | mm | |
| H | 70 | mm | |
| H1 | 36.5 | mm | |
| H2 | 16 | mm | |
| J | 102 | mm | |
| J | max. | 110 | mm |
| J | min. | 94 | mm |
| L | 130 | mm | |
| N | 19.5 | mm | |
| N1 | 11.5 | mm | |
| s1 | 26.9 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 120 | mm | |
| J7 | 13 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.77 | kg |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 140x180x12 HMS5 RG | 140 | 180 | 12 | Seals |
|---|---|---|---|---|
| 26208 | 66.675 | 92.02 | 11.13 | Seals |
| 30x40x7 CRW1 V | 30 | 40 | 7 | Seals |
| 58x85x8 CRW1 R | 58 | 85 | 8 | Seals |
| 706 ACD/P4AH | 6 | 17 | 6 | Bearings, units and housings |
| 7419 CBM | 95 | 250 | 55 | Bearings, units and housings |
| 85039 | - | - | 50.8 | Seals |
| 9243 | 23.8252 | 34.93 | 6.35 | Seals |
| AS 2035 | 20 | 35 | 1 | Bearings, units and housings |
| FY 2.7/16 TF/VA201 | 61.913 | - | 73.7 | Bearings, units and housings |
| SAFS 22517-11 x 2.13/16 T | 71.4375 | - | - | Bearings, units and housings |
| SYFWK 1.1/2 LTHR | 38.1 | - | - | Bearings, units and housings |
Hot number:
1100 VRME R
22213 EK
24286
29344 E
31177
51312
630x670x20 HDS1 V
7003 ACD/P4AH
AH 24030
BD-C 3084 KM-OH 3084 H
FSAF 22516 x 2.3/4 TLC
NKX 35 Z
PCM 121420 M
PCZ 4860 E
SAF 1510 x 1.3/4
Previous:SY 25 WDW Bearings, units and housings ---- Next:SY 3. UTF Bearings, units and housings
Return to SKF bearing