Material | Cast iron |
d | 30 | mm | |
A | 40 | mm | |
A1 | 25 | mm | |
A5 | 20 | mm | |
B1 | 35.7 | mm | |
H | 82 | mm | |
H1 | 42.9 | mm | |
H2 | 17 | mm | |
J | 117.5 | mm | |
J | max. | 127 | mm |
J | min. | 108 | mm |
L | 152 | mm | |
N | 23.5 | mm | |
N1 | 14 | mm | |
s1 | 26.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 140 | mm | |
J7 | 14 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 19.5 | kN | |
Basic static load rating | C0 | 11.2 | kN | |
Fatigue load limit | Pu | 0.475 | kN | |
Limiting speed | 6300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.05 | kg |
Hexagonal key size for grub screw | N | 4 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
11144 | 28.575 | 44.5 | 6.35 | Seals |
---|---|---|---|---|
17270 | 44.45 | 60.3 | 7.95 | Seals |
BD-231/800 CAK/W33-AOH 31/800 | 750 | 1280 | 375 | Bearings, units and housings |
6204/HR22Q2 | 20 | 47 | 14 | Bearings, units and housings |
95x125x12 HMS5 V | 95 | 125 | 12 | Seals |
D/W RW1-4-2ZS | 1.984 | 6.35 | 4.366 | Bearings, units and housings |
OH 3976 H | 360 | 380 | 164 | Bearings, units and housings |
OKF 450 | 450 | 970 | - | |
PFT 12 TF | 12 | - | - | Bearings, units and housings |
S71906 CB/HCP4A | 30 | 47 | 9 | Bearings, units and housings |
SNL 3134 ATURA | 150.8125 | - | - | Bearings, units and housings |
SSAFS 22518 | 80.9625 | - | - | Bearings, units and housings |
Hot number:
22225
BD-22314 EK-H 2314
2306 K
51116
40x55x7 HMSA10 V
50x72x12 HMSA10 RG
G 15x23x3
G 45x55x4
K 81103 TN
N 076
OKBS 96
OKC 320
SAF 22532
SAFS 22234
TUWK 1.1/4 LTA
Previous:SY 3/4 TF/VA228 Bearings, units and housings ---- Next:SY 30 LDW Bearings, units and housings
Return to SKF bearing