Material | Cast iron |
d | 35 | mm | |
A | 45 | mm | |
A1 | 27 | mm | |
A5 | 22 | mm | |
B1 | 38.9 | mm | |
H | 93 | mm | |
H1 | 47.6 | mm | |
H2 | 19 | mm | |
J | 126 | mm | |
J | max. | 133 | mm |
J | min. | 119 | mm |
L | 160 | mm | |
N | 21 | mm | |
N1 | 14 | mm | |
s1 | 29.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 3 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 146 | mm | |
J7 | 15.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.5 | kg |
Hexagonal key size for grub screw | N | 5 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1781502 | 452.5772 | 501.65 | 19.05 | Seals |
---|---|---|---|---|
26387 | 67.0052 | 88.9762 | 8.9916 | Seals |
71938 ACD/HCP4AH1 | 190 | 260 | 33 | Bearings, units and housings |
71940 ACD/HCP4A | 200 | 280 | 38 | Bearings, units and housings |
99218 | 55.5752 | 63.5 | 23.8252 | Seals |
AOHX 30/710 | 670 | 710 | 286 | Bearings, units and housings |
BD-C 2208 KTN9-H 308 E | 35 | 80 | 23 | Bearings, units and housings |
C 3060 KM | 300 | 460 | 118 | Bearings, units and housings |
NUB 213 ECJ | 65 | 120 | 31 | Bearings, units and housings |
QJ 1252 N2MA | 260 | 480 | 90 | Bearings, units and housings |
SAF 1617 x 3 T | 76.2 | - | - | Bearings, units and housings |
YAR 208-2RF | 40 | 80 | 49.2 | Bearings, units and housings |
Hot number:
15920
22310 E
28x47x10 HMS5 RG
623-Z
71805 ACD/P4
89416 M
BK 1412
MS 31/600-560
NA 4914
NJ 316 ECML
OKCX 720
PSMF 142012 A51
SY 1.15/16 TF
TUWK 1.15/16 LTA
YAR 204-012-2FW/VA201
Previous:SY 30 WF Bearings, units and housings ---- Next:SY 35 LDW Bearings, units and housings
Return to SKF bearing