Material | Cast iron |
d | 40 | mm | |
A | 48 | mm | |
A1 | 30 | mm | |
A5 | 23.5 | mm | |
B1 | 42.9 | mm | |
H | 99 | mm | |
H1 | 49.2 | mm | |
H2 | 19 | mm | |
J | 135.5 | mm | |
J | max. | 146 | mm |
J | min. | 125 | mm |
L | 175 | mm | |
N | 24.5 | mm | |
N1 | 14 | mm | |
s1 | 25.9 | mm | |
Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). |
|||
Dowel pins | |||
J6 | 161 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 30.7 | kN | |
Basic static load rating | C0 | 19 | kN | |
Fatigue load limit | Pu | 0.8 | kN | |
Limiting speed | 950 | r/min |
Mass bearing unit | 1.8 | kg |
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 7.4 | N·m | ||
Appropriate SKF mounting kit | 626830 | |||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing |
SY 508 M/VZ033
|
|||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16026 | 130 | 200 | 22 | Bearings, units and housings |
---|---|---|---|---|
12x24x7 HMSA10 V | 12 | 24 | 7 | Seals |
24164 CC/W33 | 320 | 540 | 218 | Bearings, units and housings |
18x35x7 HMS5 RG | 18 | 35 | 7 | Seals |
24172 ECCK30J/W33 | 360 | 600 | 243 | Bearings, units and housings |
72x100x10 CRSH1 R | 72 | 100 | 10 | Seals |
AOHX 31/710 | 670 | 710 | 405 | Bearings, units and housings |
FBSA 207/QBC | 35 | - | 130 | Bearings, units and housings |
GAC 50 F | 50 | 80 | 20 | Bearings, units and housings |
S7008 FW/HC | 40 | 68 | 15 | Bearings, units and housings |
SAF 22524 | 106.3625 | - | - | Bearings, units and housings |
W 63801 R | 12 | 21 | 7 | Bearings, units and housings |
Hot number:
38x58x10 HMSA10 V
403653
7022 ACD/P4A
85038
AOH 32/670 G
AS 7095
BC1B 319579
NU 1022 M
PCM 182025 M
PCZ 1616 M
SAF 22622 x 3.7/8 TLC
SAFS 23044 KA x 7.15/16
SAW 23526 x 4.5/16
SYR 1 1/2 N
YAR 210-115-2RF
Previous:SY 40 FM Bearings, units and housings ---- Next:SY 40 TDW Bearings, units and housings
Return to SKF bearing