Material | Cast iron |
d | 45 | mm | |
A | 48 | mm | |
A1 | 32 | mm | |
A5 | 23 | mm | |
B | 49.2 | mm | |
H | 107 | mm | |
H1 | 54 | mm | |
H2 | 21 | mm | |
J | 143.5 | mm | |
J | max. | 152 | mm |
J | min. | 135 | mm |
L | 187 | mm | |
N | 22.5 | mm | |
N1 | 14 | mm | |
s1 | 30.2 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 4 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 173 | mm | |
J7 | 17 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 33.2 | kN | |
Basic static load rating | C0 | 21.6 | kN | |
Fatigue load limit | Pu | 0.915 | kN | |
Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 2.1 | kg |
Hexagonal key size for grub screw | N | 4 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1350557 | 342.9 | 393.7 | 20.65 | Seals |
---|---|---|---|---|
17234 | 44.45 | 57.15 | 7.95 | Seals |
408303 | 796 | - | - | Seals |
60x105x8 CRW1 R | 60 | 105 | 8 | Seals |
6205/HC5C3 | 25 | 52 | 15 | Bearings, units and housings |
71917 CB/P4AL | 85 | 120 | 18 | Bearings, units and housings |
FYRP 1 3/4-18 | 44.45 | - | - | Bearings, units and housings |
GE 90 TXE-2LS | 90 | 130 | 50 | Bearings, units and housings |
NJ 1016 ECML | 80 | 125 | 22 | Bearings, units and housings |
NUH 2338 ECMH/PEX | 190 | 400 | 132 | Bearings, units and housings |
PCM 161815 E | 16 | 18 | 15 | Bearings, units and housings |
SAFS 22540 | 182.5625 | - | - | Bearings, units and housings |
Hot number:
260x280x16 HMS1 V
22220 EK
22318 E
24044 CC/W33
3203 A-2RS1TN9/MT33
470576
8649
8691
GEH 20 TXE-2LS
GEM 70 ESX-2LS
H 216
N 1009 KTN/SP
NKIB 5910
RLS 6
SNL 3096
Previous:SY 45 TDW Bearings, units and housings ---- Next:SY 45 TF/VA201 Bearings, units and housings
Return to SKF bearing