Material | Cast iron |
d | 60 | mm | |
A | 60 | mm | |
A1 | 42 | mm | |
A5 | 35.5 | mm | |
B | 65.1 | mm | |
H | 137.5 | mm | |
H1 | 69.9 | mm | |
H2 | 26.5 | mm | |
J | 190.5 | mm | |
J | max. | 202 | mm |
J | min. | 179 | mm |
L | 240 | mm | |
N | 29.5 | mm | |
N1 | 18 | mm | |
s1 | 39.7 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 5.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 222 | mm | |
J7 | 21 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 52.7 | kN | |
Basic static load rating | C0 | 36 | kN | |
Fatigue load limit | Pu | 1.53 | kN | |
Limiting speed | 1800 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 4.35 | kg |
Hexagonal key size for grub screw | N | 5 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
13849 | 35 | 76 | 8 | Seals |
---|---|---|---|---|
26177 | 66.675 | 88.9 | 9.53 | Seals |
305804 C-2RS1 | 20 | 52 | 20.6 | Bearings, units and housings |
49966 | 127 | 158.75 | 12.7 | Seals |
56425/56650 | 107.95 | 165.1 | 36.512 | Bearings, units and housings |
597356 | 762 | - | - | Seals |
623/HR11QN | 3 | 10 | 4 | Bearings, units and housings |
82560 | 209.55 | 260.35 | 15.88 | Seals |
KD10-604 | 105 | 419 | - | Coupling systems |
LS 120155 | 120 | 155 | 7 | Bearings, units and housings |
PSM 606860 A51 | 60 | 68 | 60 | Bearings, units and housings |
SNL 316 TURU | 80 | - | - | Bearings, units and housings |
Hot number:
18750
22344 CC/W33
23048-2CS5/VT143
361205 R
400054
6319-2Z
618/600 MA
6304-2Z/VA201
6313-2RS1
7010 CB/P4A
BD-C 30/670 KM-AOH 30/670
K 89417 M
NJ 248 MA
PCM 505520 E
YAR 212-204-2F
Previous:SY 60 TF/VA228 Bearings, units and housings ---- Next:SY 60 WF Bearings, units and housings
Return to SKF bearing