Material | Cast iron |
d | 60 | mm | |
A | 60 | mm | |
A1 | 42 | mm | |
A5 | 35.5 | mm | |
B1 | 77.8 | mm | |
H | 137.5 | mm | |
H1 | 69.9 | mm | |
H2 | 26.5 | mm | |
J | 190.5 | mm | |
J | max. | 202 | mm |
J | min. | 179 | mm |
L | 240 | mm | |
N | 29.5 | mm | |
N1 | 18 | mm | |
s1 | 46.8 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 5.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 222 | mm | |
J7 | 21 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 52.7 | kN | |
Basic static load rating | C0 | 36 | kN | |
Fatigue load limit | Pu | 1.53 | kN | |
Limiting speed | 3400 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 4.6 | kg |
Hexagonal key size for grub screw | N | 5 | mm | |
Recommended tightening torque for grub screw | 16.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22845 | 57.9882 | 78 | 10 | Seals |
---|---|---|---|---|
316010 A | 380 | 480 | 40 | Bearings, units and housings |
440x480x20 HDS1 R | 440 | 480 | 20 | Seals |
61809-2RS1 | 45 | 58 | 7 | Bearings, units and housings |
65x88x8 CRW1 R | 65 | 88 | 8 | Seals |
99118 | 30.1752 | 35.56 | 11.1252 | Seals |
C 3984 M | 420 | 560 | 106 | Bearings, units and housings |
KMT 36 | 32 | - | 180 | Bearings, units and housings |
NJ 2317 ECP | 85 | 180 | 60 | Bearings, units and housings |
NU 330 ECM/C3VL2071 | 150 | 320 | 65 | Bearings, units and housings |
SNL 3148 G | 240 | - | - | Bearings, units and housings |
SYR 2 1/2 N | 63.5 | - | - | Bearings, units and housings |
Hot number:
160 VS R
231/560 CA/W33
31317/DF
315175 A
51200 V/HR11Q1
7013 CD/P4AL
7307 BEP
82526
BT2B 331836
FYTBK 507
NU 305 ECML
NUP 314 ECP
PCM 859060 E
S7020 CB/HCP4A
Z 206
Previous:SY 60 TR Bearings, units and housings ---- Next:SY 65 TF Bearings, units and housings
Return to SKF bearing