| Housing material | Cast iron | |||


| d | 20 | mm | |
| A | 32 | mm | |
| A1 | 21 | mm | |
| B1 | 31 | mm | |
| H | 64.5 | mm | |
| H1 | 33.3 | mm | |
| J | 50.8 | mm | |
| L | 65 | mm | |
| s1 | 24 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 12.7 | kN | |
| Basic static load rating | C0 | 6.55 | kN | |
| Fatigue load limit | Pu | 0.28 | kN | |
| Limiting speed | 8500 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.47 | kg |
| Housing thread for attachment bolts | G | M8 | ||
| Thread length | G1 | 14 | mm | |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 12x30x7 HMSA10 V | 12 | 30 | 7 | Seals |
|---|---|---|---|---|
| 20x30x7 CRW1 R | 20 | 30 | 7 | Seals |
| 6315/HC5C3 | 75 | 160 | 37 | Bearings, units and housings |
| 71936 ACD/HCP4A | 180 | 250 | 33 | Bearings, units and housings |
| 860x920x25 HDS1 R | 860 | 920 | 25 | Seals |
| AH 24126 | 125 | 130 | 94 | Bearings, units and housings |
| BT4B 334016 AG/HA1VA901 | 679.45 | 901.7 | - | Bearings, units and housings |
| BTW 190 CM/SP | 190 | 290 | 120 | Bearings, units and housings |
| H 212 | 55 | 60 | 38 | Bearings, units and housings |
| HM 30/630 | 75 | - | 630 | Bearings, units and housings |
| KMFE 8 H | 13 | - | 40 | Bearings, units and housings |
| NNU 4888 KM/W33 | 440 | 540 | 100 | Bearings, units and housings |
Hot number:
10x24x7 HMS5 RG
1350542
17271
266x310x20 HS8 R
3306 A-2RS1
331500
45x85x10 HMSA10 V
C 3984 KM
FNL 508 B
GEH 17 C
NU 2236 ECM
OH 3980 HE
PCM 040504 E/VB055
YET 206-104
WS 81128
Previous:SYE 3-3 Bearings, units and housings ---- Next:SYF 25 FM Bearings, units and housings
Return to SKF bearing