| Housing material | Cast iron | |||


| d | 25 | mm | |
| A | 38 | mm | |
| A1 | 25 | mm | |
| B | 34.1 | mm | |
| H | 72.5 | mm | |
| H1 | 36.5 | mm | |
| H2 | 10 | mm | |
| J | 56 | mm | |
| L | 84 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 7000 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.65 | kg |
| Housing thread for attachment bolts | G | M10 | ||
| Thread length | G1 | 15 | mm | |
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 35x48x8 HMS5 RG | 35 | 48 | 8 | Seals |
|---|---|---|---|---|
| 36x62x7 HMS5 V | 36 | 62 | 7 | Seals |
| 37x50x6 HMSA10 V | 37 | 50 | 6 | Seals |
| 6012-Z | 60 | 95 | 18 | Bearings, units and housings |
| 7008 CB/P4A | 40 | 68 | 15 | Bearings, units and housings |
| 71910 CE/P4A | 50 | 72 | 12 | Bearings, units and housings |
| 7238 BCBM | 190 | 340 | 55 | Bearings, units and housings |
| 95x115x12 CRSA1 R | 95 | 115 | 12 | Seals |
| ECY 209 | - | - | - | Bearings, units and housings |
| IR 280x305x69 | 280 | 305 | 69 | Bearings, units and housings |
| KR 22 PPA | - | 22 | 36 | Bearings, units and housings |
| NK 26/20 | 26 | 34 | 20 | Bearings, units and housings |
Hot number:
1300 VA R
16101-2RS1
20124
2219 M
23779
33895/33821
7007 ACB/HCP4A
7014 CE/HCP4AL
71915 ACD/HCP4A
K 81114 TN
NJ 2212 ECM
SIL 10 E
SYR 3 15/16 N-118
W 6001-2RS1
YAT 206-102
Previous:SYFJ 20 TF Bearings, units and housings ---- Next:SYFJ 30 TF Bearings, units and housings
Return to SKF bearing