| Material | Cast iron | |||



| d | 44.45 | mm | |
| A | 52 | mm | |
| A1 | 36 | mm | |
| B | 49.2 | mm | |
| H | 107.5 | mm | |
| H1 | 54 | mm | |
| H2 | 20 | mm | |
| J | 143.5 | mm | |
| J | max. | 151 | mm |
| J | min. | 136 | mm |
| L | 190 | mm | |
| N | 24.5 | mm | |
| N1 | 17 | mm | |
| s1 | 30.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 4 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 174 | mm | |
| J7 | 18 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 33.2 | kN | |
| Basic static load rating | C0 | 21.6 | kN | |
| Fatigue load limit | Pu | 0.915 | kN | |
| Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 2.15 | kg |
| Hexagonal key size for grub screw | N | 3.969 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 19992 | 50.8 | 76.2 | 7.95 | Seals |
|---|---|---|---|---|
| 3308 A-2RS1 | 40 | 90 | 36.5 | Bearings, units and housings |
| 400500 | 45 | - | - | Seals |
| 50x68x10 HMS5 V | 50 | 68 | 10 | Seals |
| 7202 ACD/HCP4A | 15 | 35 | 11 | Bearings, units and housings |
| AN 20 | 19.304 | - | 99.5172 | Bearings, units and housings |
| FSAF 1313 TLC | 65 | - | - | Bearings, units and housings |
| FSAF 1515 x 2.3/8 TLC | 60.325 | - | - | Bearings, units and housings |
| NATR 17 PPXA | 17 | 40 | 20 | Bearings, units and housings |
| NNC 4932 CV | 160 | 220 | 60 | Bearings, units and housings |
| PCM 121408 E | 12 | 14 | 8 | Bearings, units and housings |
| SAF 22511 | 49.2125 | - | - | Bearings, units and housings |
Hot number:
30x52x9 CRSH1 R
471426
51201 V/HR22T2
610x660x20 HDS2 R
6205-2RSL
6310-2ZNR
HJ 1034
OKCX 720
NKI 38/20
PCMF 151717 E
QJ 310 MA
PWM 190210180
RN-3.5x15.8 BF/G2
SAF 22516 x 2.3/4
SHT 50
Previous:SYJ 1.1/4 TF Bearings, units and housings ---- Next:SYJ 100 TF Bearings, units and housings
Return to SKF bearing