| Material | Cast iron | |||



| d | 100 | mm | |
| A | 95 | mm | |
| A1 | 57 | mm | |
| B | 98.4 | mm | |
| H | 225.5 | mm | |
| H1 | 115 | mm | |
| H2 | 38 | mm | |
| J | 308 | mm | |
| J | max. | 330 | mm |
| J | min. | 286 | mm |
| L | 380 | mm | |
| N | 48 | mm | |
| N1 | 26 | mm | |
| s1 | 63.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 10.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 352 | mm | |
| J7 | 33.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 124 | kN | |
| Basic static load rating | C0 | 93 | kN | |
| Fatigue load limit | Pu | 3.35 | kN | |
| Limiting speed | 1900 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 17.6 | kg |
| Hexagonal key size for grub screw | N | 6 | mm | |
| Recommended tightening torque for grub screw | 28.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 24 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.9375 | in |
| Housing | ||||
| Bearing | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 7014 CB/P4AL | 70 | 110 | 20 | Bearings, units and housings |
|---|---|---|---|---|
| 71907 CB/P4A | 35 | 55 | 10 | Bearings, units and housings |
| 99111 | 28 | 34.925 | 12.7 | Seals |
| C 39/710 KM | 710 | 950 | 180 | Bearings, units and housings |
| C 4192 MB | 460 | 760 | 300 | Bearings, units and housings |
| FYTB 3/4 RM | 19.05 | - | - | Bearings, units and housings |
| HCRE 020 R | 25 | 178 | - | Coupling systems |
| NJ 28/530 ECMA | 530 | 650 | 72 | Bearings, units and housings |
| NU 18/750 MA | 750 | 920 | 78 | Bearings, units and housings |
| NU 2222 ECNML | 110 | 200 | 53 | Bearings, units and housings |
| SAF 22609 T | 36.5125 | - | - | Bearings, units and housings |
| SD 18x24x3 | 18 | 24 | 3 | Seals |
Hot number:
100x120x13 CRSH1 R
1588332
23122-2CS5K/VT143
34967
627-2RSL
8625
99261
D/W R1-4
NU 1028 M/C3VL2071
SAF 22630 x 5.1/4
SIL 25 C
SIL 40 ESX-2LS
SYWK 504 Y
W 61807-2RS1
ZW 80x90
Previous:SYJ 1.3/4 TF Bearings, units and housings ---- Next:SYJ 2. TF Bearings, units and housings
Return to SKF bearing