Material | Cast iron |
d | 20 | mm | |
A | 38 | mm | |
A1 | 24 | mm | |
B1 | 35 | mm | |
H | 70 | mm | |
H1 | 36.5 | mm | |
H2 | 16 | mm | |
J | 102.5 | mm | |
J | max. | 111 | mm |
J | min. | 94 | mm |
L | 140 | mm | |
N | 21.5 | mm | |
N1 | 13 | mm | |
s1 | 20.5 | mm | |
Values for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 2 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 130 | mm | |
J7 | 14 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
Mass bearing unit | 0.89 | kg |
Appropriate spanner | HN 5-6 | |||
Recommended lock nut tightening angle | a | 90 | ° | |
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
BD-231/710 CAK/W33-OH 31/710 H | 670 | 1150 | 345 | Bearings, units and housings |
---|---|---|---|---|
40x56x8 CRW1 R | 40 | 56 | 8 | Seals |
87922 | - | - | 19.05 | Seals |
FYK 508 | - | - | - | Bearings, units and housings |
C 4010 TN9 | 50 | 80 | 30 | Bearings, units and housings |
GEZ 304 ESL-2LS | 82.55 | 130.175 | 72.238 | Bearings, units and housings |
HJ 314 EC | 70 | 97.4 | 15.5 | Bearings, units and housings |
KD10-705 | 115 | 521 | - | Coupling systems |
NX 35 | 35 | 47 | 30 | Bearings, units and housings |
RN-3x9.8 BF/G2 | - | - | 3 | Bearings, units and housings |
SAW 23218 | 90 | - | - | Bearings, units and housings |
SSAFS 22224 T | 120 | - | - | Bearings, units and housings |
Hot number:
20 VS R
2075562
BD-24040 CCK30/W33-AH 24040
34336
355 VE R
404256
470521
6015 M
65x140x12 HMSA10 RG
85839
FSAF 22518 x 3.1/4
L 467549/510
SAF 1609 T
SNL 3072 TURA
W 61914-2RS1
Previous:SYJ 20 TF Bearings, units and housings ---- Next:SYJ 25 TF Bearings, units and housings
Return to SKF bearing