Bearings, units and housings -- Bearing units -- Y-bearing units (ball bearing units) -- Y-bearing plummer block units -- Y-bearing plummer block units SKF SYJ 35 TF
SYJ 35 TF
| Material | Cast iron | |||
Dimensions
| d | 35 | mm | |
| A | 46 | mm | |
| A1 | 28 | mm | |
| B | 42.9 | mm | |
| H | 93 | mm | |
| H1 | 47.6 | mm | |
| H2 | 17 | mm | |
| J | 129 | mm | |
| J | max. | 136 | mm |
| J | min. | 122 | mm |
| L | 167 | mm | |
| N | 24 | mm | |
| N1 | 17 | mm | |
| s1 | 25.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 153 | mm | |
| J7 | 16 | mm | |
| N4 | 4 | mm | |
Calculation data
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 5300 | r/min |
(with shaft tolerance h6)
Mass
| Mass bearing unit | 1.4 | kg |
Mounting information
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Appertaining products
| Housing | ||||
| Bearing | ||||